Fleck Sensitive Skin & Eczema System

Buy Now

View full details

How Seasonal or Multi-Year Variation Shows in the Record

The U.S. Geological Survey has sampled groundwater from four wells in Middlesex County's aquifer 227PSSC from April 2012 through August 2025. Across 20 samples taken at depths between 27 and 52 feet, hardness levels—measured by the concentration of calcium and magnesium—ranged from 145.0 to 646.0 mg/L, with a median of 231.5 mg/L. This range reflects natural variation over seasons and years, suggesting that water hardness can fluctuate notably within this area, though all measurements remained below federal thresholds for health concerns.

What a Certified Laboratory Test for Hardness Reports and How to Read It

A certified laboratory test for hardness will report calcium and magnesium levels in milligrams per liter (mg/L), representing total concentration. Since hardness is a measure of mineral content, particularly calcium and magnesium, the test results indicate how much these minerals are present but do not alone determine whether the water is safe. For households with sensitive skin, understanding the concentration helps assess potential skin irritation but does not imply health risk. Testing your specific water is essential because regional data cannot substitute for your household’s unique conditions.

Which Fixtures, Appliances, or Processes Are Affected First and Why

Water with higher hardness, as seen in some samples from this region, often impacts fixtures and appliances that come into frequent contact with water. Faucets, showerheads, and bathtubs may show scaling or feel different to the touch. For people with sensitive skin, shower water quality matters most because skin exposure is direct and extended. Appliances like water heaters or dishwashers may experience mineral buildup earlier, but these effects do not directly cause skin irritation. Understanding which household points receive the hardest water helps target treatment efforts effectively.

A Worked Example: Reading the Record's Median and Range as a Homeowner Would

Consider the median hardness level of 231.5 mg/L from the USGS records for aquifer 227PSSC. This value falls within the moderate-to-hard water category, which may contribute to sensations of dryness or irritation for sensitive skin. However, the range extends up to 646.0 mg/L in certain samples, indicating periods when mineral concentration can be significantly higher. As a homeowner, this suggests that at times your water could feel much harder than typical but remains below health-based limits. Without testing your own supply, you cannot be certain where you fall within this range.

What the Reader Should Write Down Before Asking Anyone for Treatment Advice

Before seeking treatment recommendations, note the following information: the dates and depths of available well samples; your household’s routine water testing results, if available; any noticeable changes in water feel or skin response; and specific household water use patterns. Documenting these details ensures any advice is grounded in your water’s actual profile, not just regional data. For sensitive skin, understanding your water quality at the tap combined with usage frequency is necessary for an informed solution.

What Distinguishes This Problem from the Two Problems Most Often Confused With It

Sensitive skin concerns related to water are often confused with issues caused by harsh chemicals like chlorine or by bacterial contamination. The data from Middlesex County’s aquifer 227PSSC show calcium and magnesium hardness without indication of chemical disinfectants or microbial presence. Hard water’s potential to contribute to skin dryness or irritation is separate from chemical or microbial factors requiring different treatment approaches. Clarifying this distinction ensures the selected water treatment addresses the real cause of sensitivity.

These U.S. Geological Survey groundwater samples cover a specific depth range and timeframe for Middlesex County’s aquifer 227PSSC, not individual household water. For detailed treatment, consider the Fleck Sensitive Skin & Eczema System, which ships ready to configure and has a grain capacity of 32,000, designed to manage hardness affecting sensitive skin. For further information, see the USGS water-quality data directly at their official site.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2025-08-05. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 227PSSC aquifer (Middlesex County): 20 results from 4 wells, median 231.5 mg/L, range 145.0-646.0 mg/L; none above any federal threshold