Assessing Plumbing Material and Age Separate from Water Source
Older plumbing can influence water contact effects on sensitive skin
While water minerals affect skin, the type and age of pipes can modify water characteristics further through corrosion or buildup. Evaluate piping material independently when considering skin sensitivity issues.
Newer plumbing may reduce added contaminants but not mineral content
Upgraded plumbing does not eliminate naturally occurring minerals from the source, so sensitive skin reactions may persist despite recent pipe replacement.
Interpreting Measured Mineral Ranges Against Federal Standards
Median hardness of 215 mg/L in Colbert County aquifer samples is below federal health thresholds
U.S. Geological Survey data from three wells sampled between 2011 and 2022 show hardness ranging from 146 to 322 mg/L. None of these measurements exceed any federal limits. This means the mineral levels are within a range considered acceptable for safety, though they may still affect sensitive skin.
Detected mineral concentrations do not indicate an individual household’s water quality
These figures represent area-wide sampling and are not a direct measurement of your home’s water. Individual testing is necessary to determine your specific water profile.
Considerations for Large or Seasonal Households
Higher daily water use may require treatment solutions with sufficient capacity
Families with more residents or seasonal occupancy should select systems capable of handling increased mineral load to maintain skin comfort consistently.
Intermittent water use in seasonal homes may affect system effectiveness and maintenance needs
Water treatment solutions should accommodate infrequent operation periods without compromising mineral reduction for sensitive skin protection.
Differences Between Public-System Records and Private Well Testing
Public records provide broad regional data but lack individual well specifics
Data from the U.S. Geological Survey reflect multiple wells in Colbert County but do not substitute for private well testing which reveals exact conditions affecting your household’s water.
Private testing is essential to confirm presence and levels of minerals relevant to sensitive skin
Because mineral content can vary locally, personal water analysis is recommended to develop an effective treatment approach.
How the Fleck Sensitive Skin & Eczema System Handles Minerals Affecting Skin
The system targets mineral content that may contribute to sensitive skin irritation
Designed to treat up to 32,000 grains, the Fleck Sensitive Skin & Eczema System reduces hardness minerals, particularly calcium and magnesium, that are measured in the local aquifer and linked to skin sensitivity issues.
The technology ships ready to configure, facilitating adaptation to household water demands
This direct-purchase system does not require professional setup, allowing homeowners to address mineral-related skin concerns effectively.
Understanding 'Detected,' 'Median,' and 'Range' in Area Sampling
'Detected' means presence was measured but not necessarily a problem
All five samples detected hardness minerals, indicating these are typical components of the local groundwater rather than contaminants.
'Median' represents the middle value of the sample set, here 215 mg/L
This figure summarizes the typical mineral level found across multiple wells, providing a local average without implying individual water quality.
'Range' shows the variation across samples, from 146 to 322 mg/L
The range indicates the spread of hardness results, highlighting variability in different wells but remaining within the federal standards.
This sampling data is from wells 28 to 53 feet deep in the Colbert County aquifer (331MSSPU). For detailed water quality specifics, consult the U.S. Geological Survey groundwater database covering this aquifer and region.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2022-03-15. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 331MSSPU aquifer (Colbert County): 5 results from 3 wells, median 215.0 mg/L, range 146.0-322.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.