Pentair Sensitive Skin & Eczema System

Buy Now

View full details

Starting with Simple Checks Versus Laboratory Testing

A frequent mistake by households with sensitive skin is assuming the water’s hardness or mineral content is the direct cause without first confirming through testing. Before considering costly evaluations or treatment upgrades, begin with inexpensive water hardness test strips or kits. These reveal whether minerals like calcium and magnesium—known contributors to hardness—are present in amounts typical for the area. If these suggest normal levels, a laboratory test providing a precise mineral analysis is the logical next step. This confirms the water's makeup and helps avoid unnecessary over-treatment.

Routine Care for the Sensitive Skin & Eczema System

The Pentair Sensitive Skin & Eczema System is designed with a grain capacity of 32,000, enabling it to handle typical household water demands effectively. Maintaining its performance includes following recommended cycles for resin regeneration and periodic checks of system components to ensure optimal function. The system ships ready to configure, making the process straightforward and manageable without specialist help.

How Calcium and Magnesium Get Into Claiborne Parish Groundwater

Calcium and magnesium, the minerals contributing to water hardness, enter the Claiborne Parish aquifer 124SPRT primarily through natural geological processes. As water percolates through soil and rock layers up to 750 feet deep, it dissolves mineral deposits, gradually increasing concentrations. This natural mineralization varies across wells but generally remains below thresholds requiring regulatory concern.

Interpreting the Number and Nature of Regional Water Samples

The area's water data derives from nine sampling results collected from three wells between 494 and 750 feet deep from 2010 to 2014. While this sample size is limited, it provides a representative snapshot of the aquifer's typical conditions. Homeowners should understand this data reflects regional trends and not specific household wells, which can vary due to local geology and well depth.

Potential Long-Term Effects of Untreated Water for Sensitive Skin

If mineral content typical of the area is left untreated in households with sensitive skin, residents might notice skin dryness or irritation over long periods. The minerals themselves do not cause health hazards but can exacerbate skin sensitivity through deposits left on skin surfaces. The Pentair system helps manage these effects by conditioning water to reduce mineral interaction with skin.

Using Median and Range Data to Guide Household Decisions

The regional median concentration for calcium and magnesium combined is approximately 0.86 mg/L, with observed values ranging from 0.8 to 3.95 mg/L. A household using this data should consider that their own water could fall anywhere in this range. This range indicates relatively soft water by general standards, but individual variation means personal testing remains essential to determine the precise condition.

Recommended Next Step: The one essential step to clarify if water treatment can assist sensitive skin is to order a certified laboratory test specifically measuring calcium and magnesium hardness in the household's water supply. The results will establish whether mineral content aligns with or exceeds regional figures and validate the need for the Pentair Sensitive Skin & Eczema System or similar solutions.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2014-11-18. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 124SPRT aquifer (Claiborne Parish): 9 results from 3 wells, median 0.86 mg/L, range 0.8-3.95 mg/L; none above any federal threshold