Fleck Sensitive Skin & Eczema System

Buy Now

View full details

Common Misreading: Sensitive Skin and Water Quality Are Not Always Directly Linked

Many households in Burlington County believe their sensitive skin issues stem directly from hard water levels. However, government groundwater monitoring from the local aquifer 121CKKD shows a wide range of mineral concentrations, and not all detections indicate a problem that automatically affects skin. Understanding the data and what it means for your own water is key before sizing any treatment system.

1. What the Burlington County Aquifer Records Reveal About Water Quality

The U.S. Geological Survey sampled 13 wells from the 121CKKD aquifer area, totaling 37 test results between April 2010 and June 2024. These wells ranged in depth from 10 to 102 feet. The median calcium and magnesium concentration was 3.19 mg/L, with values varying from as low as 0.65 mg/L to a high of 136.0 mg/L. This wide range means local water quality can differ substantially from one well site to another. Also, no measurements among these samples exceeded any federal threshold, which confirms the water meets regulatory standards but does not rule out aesthetic or personal sensitivity effects.

2. Changes at the Tap from Using the Fleck Sensitive Skin & Eczema System

The Fleck Sensitive Skin & Eczema System is designed to address mineral content that can contribute to skin reactivity. Once configured, this system modifies water chemistry to be gentler on sensitive skin by adjusting mineral concentrations within a known capacity of 32,000 grains. This treatment can lessen the minerals that sometimes irritate sensitive skin, improving comfort in daily water use such as bathing and hand washing. It is important to note that this system ships ready to configure without requiring professional service.

3. Comparing Burlington County’s Data With Nearby Areas Without Overreaching

Comparisons between aquifer 121CKKD in Burlington County and neighboring groundwater sources should be made cautiously. Variations in mineral levels and water chemistry stem from geological differences. For example, a neighboring county might have a higher median or a narrower range of calcium and magnesium values, but this does not automatically mean their water is better or worse for sensitive skin. The local sample count and depth ranges also affect the snapshot quality. Each area’s data should be viewed as a guide, not a definitive personal water condition statement.

4. Reading the Median and Range of Aquifer Mineral Data as a Burlington County Homeowner

The median value of 3.19 mg/L calcium plus magnesium indicates that half the samples had mineral content below this and half above, reflecting typical groundwater conditions in the area aquifer. The broad range up to 136.0 mg/L shows some wells contain significantly more minerals, illustrating why some residents might perceive effects not common to everyone in Burlington County. Two samples recorded levels below the reporting limit, highlighting that some wells can have minimal mineral presence. Understanding this spread helps inform how much adjustment your household water might need.

5. Interpreting a Certified Laboratory Test for Your Household Water

To determine your home’s specific water mineral concentration, you should order a certified laboratory test focused on calcium and magnesium. The report will provide exact milligrams per liter levels. If the combined hardness is near the local median or within the lower half of the range, sensitivity effects might be less pronounced. If near the upper range, treatment adjustments may be more important. This testing is the only way to personalize the sizing and effectiveness of any water treatment solution.

Conclusion: Which Test Will Finalize Your Sizing Needs?

For households with sensitive skin considering water treatment in Burlington County, the critical step is a precise water hardness test from a certified laboratory. This test will confirm mineral concentrations and guide the capacity needed in a water treatment solution such as the Fleck Sensitive Skin & Eczema System, which operates effectively up to a 32,000-grain capacity. Knowing your own water’s mineral content allows for a tailored approach that avoids assumptions based on regional data alone.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2024-06-05. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 121CKKD aquifer (Burlington County): 37 results from 13 wells, median 3.19 mg/L, range 0.65-136.0 mg/L; none above any federal threshold