48 Fiberglass Tanks - Twin Unit Skid

48 Fiberglass Tanks - Twin Unit Skid

Buy Now

View full details

This week, you need to decide how to manage water heater scale throughout your entire commercial building to maintain equipment and operational efficiency.

How Treated Water Differs at the Tap with Commercial System Skids

Reduction of Calcium and Magnesium Ions

After using a commercial system skid such as the 48 Fiberglass Tanks - Twin Unit Skid, the hardness-causing minerals calcium and magnesium are reduced, which lessens scale formation on water heaters.

Softer Water Throughout the Facility

The treated water reaches all taps and appliances, minimizing mineral buildup that can impair performance and increase maintenance needs in commercial water heaters.

Facility Symptoms That Indicate or Do Not Indicate Water Heater Scale

Signs Indicative of Water Heater Scale

  • Reduced heating efficiency or longer heating cycles
  • Visible mineral deposits inside accessible water heater components
  • Unexplained increases in energy consumption associated with hot water usage

Symptoms Not Linked to Hardness Scale

  • Leaks unrelated to mineral deposits
  • Water discoloration or turbidity without scale evidence
  • Mechanical failures unrelated to mineral buildup

Adjustments for Whole-Building Hardness Treatment in Commercial Properties

Capacity Planning for Continuous Water Demand

Large commercial buildings require treatment systems configured to handle continuous, high-volume water flow to prevent untreated water from bypassing the softening system.

Redundancy for Maintenance Periods

Twin unit skid configurations provide operational redundancy to ensure uninterrupted water treatment during maintenance or regeneration cycles.

Interpreting Certified Laboratory Water Hardness Tests

Understanding Hardness Concentration Reporting

Laboratory reports typically state hardness as combined calcium and magnesium concentrations in milligrams per liter (mg/L). This indicates the level of dissolved minerals that can cause scale.

Testing Your Own Water Versus Regional Data

The U.S. Geological Survey sampled wells in Hardeman County’s aquifer 124MMPS, finding hardness concentrations ranging from 8.96 to 133.0 mg/L with a median of 30.6 mg/L, measured from wells 63 to 260 feet deep. This regional data provides a reference but does not specify your building’s water hardness, which requires site-specific testing.

Maintenance Rhythm for the 48 Fiberglass Tanks - Twin Unit Skid

Regular Monitoring of Softening Performance

Periodic checks of water hardness at treated outlets help confirm system efficacy and indicate when maintenance activities like media replacement or regeneration are needed.

Scheduled Media Replacement and Regeneration

Based on facility water usage, the system’s media will require timely regeneration protocols to maintain scale prevention, with the twin-unit skid allowing alternating cycles for continuous treatment.

Assessing Treatment Capacity Against Commercial Daily Demand

Calculating Water Usage for Treatment Sizing

Estimate your building’s peak and average daily water consumption in gallons per minute to ensure the 48 Fiberglass Tanks - Twin Unit Skid is scaled appropriately for effective whole-building treatment.

Allowing Margin for Demand Variability

Factor in seasonal or operational fluctuations in water use to avoid scale issues during periods of higher consumption.

Government sampling in Hardeman County’s aquifer 124MMPS recorded water hardness between 8.96 and 133.0 mg/L across multiple wells, none reporting levels exceeding federal thresholds. This regional data originates from the U.S. Geological Survey groundwater sampling program accessible at waterdata.usgs.gov/monitoring-location/352551089065601/ and can guide your understanding as you evaluate water hardness challenges for your commercial facility.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2022-04-27. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 124MMPS aquifer (Hardeman County): 6 results from 4 wells, median 30.6 mg/L, range 8.96-133.0 mg/L; none above any federal threshold

The right way to buy a water system: sized to your water, backed for life, free U.S. shipping.
💳 Buy now, pay over time with Shop Pay Installments  ·  🇺🇸 Free U.S. Shipping
  • ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
  • ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
  • ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.
Not sure what you need? Take the 60-second quiz →

Newsletter

A short sentence describing what someone will receive by subscribing