Pentair Safe Drinking Water Filter

Buy Now

View full details

If your laboratory test report shows the lead 90th percentile level

In Mississippi County, AR, the Blytheville Waterworks public water system serves around 12,981 people via 6,411 connections, relying on groundwater as its source. According to EPA records, the most recent lead 90th percentile measurement was 0.001 mg/L, taken at the distribution or plumbing level on December 31, 2025. This figure reflects lead concentrations found in samples taken within plumbing systems, not directly in the groundwater source. It is important to note that this measure represents a percentile of sampled homes and does not establish the specific exposure level at any single home.

The lead 90th percentile is a common reporting metric expressing the concentration value below which 90 percent of samples fall, indicating the distribution of lead levels across the system. This metric is useful for assessing potential exposure risks and determining if further treatment or mitigation efforts are warranted. If your home's laboratory test includes this percentile, it is a key indicator to consider when deciding on water treatment options.

If you want to know how treated water quality will change at your tap

The Pentair Safe Drinking Water Filter ships ready to configure to address concerns about lead and similar contaminants. When in use, it reduces dissolved lead levels by retaining lead particles before water reaches your household fixtures, effectively lowering the risk of lead ingestion. This difference means filtered water can provide greater peace of mind for families seeking consistent water safety. However, the filter’s effectiveness depends on proper sizing relative to your daily water use.

If you want to match treatment capacity with household daily water demand

Determining treatment capacity involves evaluating your household's typical daily water consumption. Factors such as the number of residents, routine uses (drinking, cooking), and water flow rate contribute to this demand. The Pentair system is designed to handle typical residential volumes, but households with unusually high water usage might need to consider capacity carefully. It is advisable to compare your average daily water use with the filter's documented flow rate and filter life to ensure continued protection without performance degradation.

If lead or similar constituents go untreated over many years

Long-term exposure to low levels of lead may increase health concerns, particularly for vulnerable individuals such as children and pregnant women. Continuous ingestion of water with elevated lead levels could contribute to cumulative effects. However, the presence of lead detected in distribution samples for Blytheville Waterworks is low, and only one health-based violation has been recorded for the system, indicating overall regulatory compliance. Untreated water may not cause immediate symptoms but addressing potential contaminants proactively supports household health over time.

If your plumbing is old or contains materials prone to lead leaching

Lead concentrations found in household samples often result from plumbing materials rather than the source groundwater. Homes with older pipes, faucets, or solder containing lead can experience elevated lead levels even if the source water is low in lead. Understanding your home’s plumbing material and age helps determine whether treatment at the point of use, such as with the Pentair Safe Drinking Water Filter, will effectively address the concern compared to treating source water. Testing water directly at the tap can clarify the specific exposure risk.

If you need to distinguish this issue from other common water concerns

Lead presence in water is often confused with other issues like hardness or sediment, which also affect taste or appearance but do not pose the same health risks. The EPA’s records for Blytheville Waterworks indicate one health-based violation but do not report aesthetic issues such as discoloration or hardness exceeding secondary standards. Understanding whether detected substances relate to health-based contaminants or aesthetic factors helps guide the right treatment choice. The Pentair system focuses specifically on reducing lead and similar metals, differing from treatments designed for hardness or sediment.

If you want to know which household points are affected first

Fixtures used most frequently for drinking and cooking, such as kitchen sinks and ice makers, typically show the greatest impact from lead in water, since water remains in contact with plumbing materials at these points. Other fixtures, like showers or garden hoses, experience different exposure and are less relevant to ingestion risk. The Pentair Safe Drinking Water Filter targets these critical points to reduce lead immediately before consumption or food preparation, providing focused protection where it matters most.

What you should not conclude from Mississippi County water system data: The data applies to the public water system as a whole, not to individual household plumbing or well water. Detection or concentration levels in system-wide samples do not establish your home’s water quality. Only a certified laboratory test of water taken directly from your tap can provide specific information about your household’s exposure. Additionally, the presence of lead does not automatically indicate unsafe water but highlights the need for informed decision-making about treatment options tailored to your situation.

Where this information comes from

Source: EPA SDWIS public water system record. Sampled 2025-12-31. These figures describe the public water system's record, not the plumbing inside any individual building.

On record: EPA SDWIS record for BLYTHEVILLE WATERWORKS (AR0000365), groundwater supply, serving 12981 people: 1 health-based violations of 2 total; lead 90th percentile 0.001 mg/L