Autotrol Radon in Water Filter

Buy Now

View full details

Certified Laboratory Radon Water Test Reports: What They Show

The U.S. Geological Survey sampled radon-222 in seven wells from Webster Parish's aquifer 124SPRT between mid-2012 and mid-2014. The median radon concentration measured was 86.0 picocuries per liter (pCi/L), with results ranging from 54.0 to 640.0 pCi/L. Every tested well showed radon present at or above the reporting limit; none were below it. These samples represent deep wells between 80 and 640 feet, providing a general picture of radon levels in groundwater from this aquifer but do not indicate the radon concentration in any individual household's well or tap water. A certified laboratory test for your own water sample will specify the radon level in the water you use, expressed in the same units. Understanding this value requires knowing the regulatory context: while federal guidelines set benchmarks for radon in water, none of these sampled levels exceeded those health-based limits at the time of testing.

Preparing for Treatment Advice: What to Record From Your Water Situation

Before seeking treatment options, note your home's water source type—private well or public supply. If you have a private well, obtain a recent certified laboratory test for radon-222 concentration in your household water. Record the radon level reported in picocuries per liter, the well depth if known, and testing date. Also, observe if any changes in water taste, odor, or appearance have occurred, although these are not reliable indicators of radon presence. This detailed information helps in evaluating whether radon mitigation is needed and what solutions fit your situation.

Changes in Water from Autotrol Radon in Water Filter Treatment

When the Autotrol Radon in Water Filter is put into service, it works by reducing radon concentrations in household water before it reaches taps. This technology is designed to mitigate radon specifically, helping lower its presence without altering other water quality characteristics. Treated water typically shows reduced radon levels consistent with effective filtration, improving safety perceptions while maintaining normal taste and clarity. The system ships ready to configure for residential use, integrating into existing water lines. Unlike some treatments, it does not add chemicals or affect water hardness.

Aesthetic Secondary Standards Versus Health-Based Limits for Radon

The federal government distinguishes between aesthetic secondary standards—criteria intended to address taste, staining, or corrosivity—and health-based limits that protect against health risks. For radon in water from Webster Parish's aquifer 124SPRT, the reported concentrations fall below federal health-based guidelines, suggesting no violation of safety thresholds. There are no aesthetic secondary standards specifically for radon because it does not affect taste or staining noticeably. Understanding this distinction helps clarify that detecting radon does not necessarily mean water is unsafe or unsuitable for use.

Comparing Public System Records and Private Well Testing

Public water systems in the area regularly test for radon and other parameters under regulatory oversight, reporting no health-based violations for radon to date. However, private wells are not subject to this regulatory routine and may have radon levels that vary significantly. Government sampling of wells in aquifer 124SPRT provides baseline regional data but does not replace testing individual wells. Homeowners relying on private wells should obtain their own certified radon test to understand their water quality and make informed choices about treatment.

Identifying Water and Household Signs That May or May Not Indicate Radon

Since radon is a colorless, odorless, and tasteless radioactive gas, it does not cause noticeable changes in water appearance or smell. Thus, typical household water symptoms like cloudiness, odor, or discoloration do not indicate radon presence. If radon levels are elevated, the main concern is long-term exposure through inhalation of radon released from water during household use, not immediate water quality symptoms. Testing is the only reliable method to identify radon in drinking water.

To settle whether radon in your household water is a concern, order a certified laboratory analysis of radon-222 concentration from your own water source. If the level is at or above health-based guidelines, considering the Autotrol Radon in Water Filter can be an effective response to reduce radon exposure in your home water supply.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2014-07-28. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Radon-222 in the 124SPRT aquifer (Webster Parish): 8 results from 7 wells, median 86.0 pCi/L, range 54.0-640.0 pCi/L; none above any federal threshold