Fleck Nitrate & Nitrite (Well) Filter

Buy Now

View full details

When you turn on a kitchen faucet or fill a glass, high nitrate levels may go unnoticed because nitrate itself is colorless and tasteless. Yet, residents in Sussex County relying on wells drawing from aquifer 112CLMB might be facing water with a range of nitrate concentrations. Understanding the area data can help you decide if treatment is advisable for your household water supply.

How the Fleck System Removes or Neutralizes Nitrate

The Fleck Nitrate & Nitrite Filter is designed to address nitrate by passing water through a specialized media that selectively reduces nitrate and nitrite ions. This process effectively lowers their presence in the treated water, providing safer water for consumption and use. The unit ships ready to configure for your setup, focusing on nitrate and nitrite reduction without affecting other water components.

Which Fixtures, Appliances or Processes Are Affected First and Why

Fixtures delivering drinking and cooking water, such as kitchen taps and refrigerators with water dispensers, are the primary concern. These points require water lower in nitrate to reduce potential health risks associated with ingestion. Water used in bathing or washing is less critical regarding nitrate but still part of overall household water management.

How Public-System Records Differ from Private-Well Testing in What They Establish

Government records for Sussex County aquifer 112CLMB are compiled from samples taken at multiple wells, ranging in depth from 2 to 139 feet and collected over more than a decade. These results give a broad view of nitrate levels in the aquifer but do not specify nitrate content in any single household well. To know your own water’s nitrate concentration, an individual water test is necessary.

How Seasonal or Multi-Year Variation Shows in the Record (Dates and Ranges Given)

Samples collected from April 2011 through August 2024 show nitrate levels ranging widely from 0.059 mg/L to 112.0 mg/L. The median value for these 236 tests is 11.9 mg/L. The data reflect natural and human factors influencing nitrate presence over time, highlighting the importance of periodic testing rather than assuming static water quality.

A Worked Example: Reading the Record’s Median and Range as a Homeowner Would

Imagine your well is part of this area’s aquifer system. The median nitrate concentration of 11.9 mg/L indicates that half the sampled results were below and half above this level. Note that 136 out of 236 samples exceeded the federal maximum contaminant level of 10.0 mg/L, a health-based threshold. This does not mean your water is above or below that limit, only that nitrate above the limit is common in the region.

What Questions a Commercial or Industrial Operator Adds that a Household Does Not

Larger-scale users typically consider flow rates, treatment capacity, regulatory compliance, and post-treatment waste management. While households focus on safe drinking water volume and system ease of use, commercial operators also factor in operational costs, discharge regulations, and system scalability.

The nitrate data referenced here come from 65 wells sampled throughout Sussex County’s aquifer 112CLMB between 2011 and 2024 as documented by the U.S. Geological Survey. This record provides insight into area groundwater nitrate conditions but does not replace the need for home-specific water testing. For detailed information, visit the U.S. Geological Survey monitoring site for well 384134075381908.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2024-08-28. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Nitrate in the 112CLMB aquifer (Sussex County): 236 results from 65 wells, median 11.9 mg/L, range 0.059-112.0 mg/L; 136 above a health-based federal MCL (federal MCL 10.0 mg/L)