Pentair Orange Iron & Rust Stains Filter

Buy Now

View full details

If a Certified Laboratory Test Reports Iron Concentrations in Your Water

A certified water analysis for iron quantifies the amount of iron present in your household water supply, ideally reported as micrograms per liter (ug/L). Such a test will provide a specific concentration for your own well or tap, which is essential since regional data cannot determine your individual levels. Understanding this test result requires noting the exact number and comparing it to known government sampling ranges, but no single concentration alone defines water safety or treatment necessity.

If You Encounter Terms Like 'Detected,' 'Median,' and 'Range' in Government Sampling Records

The government sampling record for Mobile County's 122MOCN aquifer shows iron was detected in 25 of 26 wells sampled between June and August 2011. The median iron concentration across these wells was 8.9 ug/L, with a range from 3.3 to 59.8 ug/L. These values represent measurements in separate wells 14 to 68 feet deep and do not specify any one well's condition. 'Detected' means the testing instrument measured iron present; it does not indicate a violation or unsafe level. The median provides the middle value of the dataset, while the range shows the variation between the lowest and highest concentrations found in the sampled area.

If You Are Considering Commercial or Industrial Water Use Questions Beyond Household Concerns

Commercial or industrial operations often need to account for larger volumes and stricter operational requirements regarding iron content. They may require detailed iron speciation, continuous monitoring, or performance data on treatment technologies relevant to their process. Households generally focus on removing iron to prevent aesthetic problems, such as stains and discoloration, rather than meeting industrial regulatory thresholds or production specifications.

If You Wonder Why Aesthetic Secondary Standards Differ from Health-Based Limits for Iron

Iron is regulated primarily by secondary standards that concern water appearance, taste, and staining potential, not health risks. The federal government has no iron health-based maximum contaminant level; the secondary standard benchmarks address how iron can cause reddish or brown stains in plumbing fixtures and laundry and may impart a metallic taste. Iron concentrations found in Mobile County's aquifer samples remain below any federal thresholds, confirming no federally recognized health concern arises from these measurements.

If You Are Comparing Public Water System Records with Private Well Water Testing

Public system water quality reports cover the water supplied to many users and must conform to regulatory requirements. They reflect system-wide sampling but cannot specify individual household variance. Conversely, private well water testing provides information specific to your water source. The government sampling data for Mobile County’s aquifer reflects regional conditions from multiple wells rather than your specific water supply, underscoring the importance of obtaining your home's water analysis to guide treatment.

If You Need to Note Key Details Before Seeking Water Treatment Advice

• Source type (well or municipal)
• Depth of water source, if known
• Certified laboratory result for iron concentration (ug/L)
• Other water quality parameters relevant to aesthetic concerns
• Daily household water use volume
• Specific symptoms or issues observed, such as staining or metallic taste

Recording these facts will help identify the most suitable treatment approach for your household’s iron and rust challenges.

This page presents iron data sampled from 26 wells in Mobile County’s 122MOCN aquifer area between June and August 2011, based on U.S. Geological Survey records. For details, refer to the official government water-quality source.

For households facing iron and rust staining issues consistent with regional data, the Pentair Orange Iron & Rust Stains Filter ships ready to configure and is designed to address iron-related discoloration effects effectively.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2011-08-11. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Iron in the 122MOCN aquifer (Mobile County): 26 results from 26 wells, median 8.9 ug/L, range 3.3-59.8 ug/L; none above any federal threshold