Fleck Corrosive Water Damaging Pipes Filter

Buy Now

View full details

Many Richmond County residents notice unusual wear on plumbing or metallic taste in their water, signs often linked to corrosive water. This condition arises when water acidity affects pipes and fixtures, sometimes causing damage over time.

How Public-System Records Differ from Private-Well Testing in What They Establish

Government sampling of aquifer 211MDVL in Richmond County provides extensive data on groundwater characteristics but does not certify any individual well’s water quality. The U.S. Geological Survey collected 205 pH results from 13 wells ranging in depth from 100 to 455 feet between 2010 and 2025 in this area. These results represent a regional snapshot rather than the specifics of any single household’s supply.

What Happens When This Problem Is Left Untreated for Years

Water with low pH values—that is, acidic water—can accelerate corrosion inside household plumbing and appliances. Over months or years, this corrosion may result in pinhole leaks or premature deterioration of metal components. While corrosion does not pose a direct health hazard, it can cause inconvenient repairs and increase maintenance costs.

What a Certified Laboratory Test for pH Reports and How to Read It

Laboratory measurement of water pH assigns a numeric value indicating acidity or alkalinity. The Environmental Protection Agency has identified a secondary reference range for pH between 6.5 and 8.5 standard units to address aesthetic and corrosivity concerns, not health-based standards. In Richmond County’s sampled wells, 198 of 205 pH results fell below 6.5, indicating acidic water is common. For your household water, only testing your exact source can determine the pH you experience.

How the Treated Water Differs at the Tap Once the Documented Technology Is in Place

Water treated by the Fleck Corrosive Water Damaging Pipes Filter arrives at your faucet with reduced corrosivity. This system modifies water chemistry to limit acidity that harms pipes while preserving water quality. After applying this treatment, you can expect less degradation of plumbing and related fixtures over time.

How the Constituent Enters Groundwater or the Distribution System in This Region

In Richmond County, groundwater naturally varies in pH due to geological and environmental factors affecting aquifer 211MDVL. Acidic conditions may result from the mineral composition of soil and rock layers, organic material decomposition, or other natural processes. Municipal systems drawing from this groundwater often reflect these pH variations, which underscore the need for individual water assessment.

What 'Detected', 'Median' and 'Range' Mean in the Sampling Record on This Page

'Detected' means that the pH was measurable in every sample collected, ensuring values represent the actual presence of acidity or alkalinity. The 'median' of 5.1 standard units shows that half the measurements were below this pH and half were above, indicating a tendency toward acidic water in the region. The 'range' from 2.8 to 9.4 illustrates variability across different sample wells and depths.

To address corrosive water effectively for your home, testing your water source for pH is essential. Based on measurements obtained, the Fleck Corrosive Water Damaging Pipes Filter ships ready to configure, providing targeted treatment to reduce water’s corrosivity and protect your household plumbing.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2025-07-10. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of pH in the 211MDVL aquifer (Richmond County): 205 results from 13 wells, median 5.1 standard units, range 2.8-9.4 standard units; EPA secondary standard for pH is 6.5-8.5 (aesthetic/corrosivity, not health-based); 198 of 205 sampled results fell below 6.5