Many households in Navajo County notice that water can sometimes seem to affect plumbing longevity or cause metal surfaces to tarnish more quickly than expected. This experience is common in areas where groundwater has properties that can lead to corrosion inside pipes.
How does water change at the tap after using the Autotrol Corrosive Water Damaging Pipes Filter?
Once water passes through the Autotrol Corrosive Water Damaging Pipes Filter, the treated water is adjusted to reduce corrosive effects that can harm pipes and fixtures. The system conditions water to help minimize chemical interactions that contribute to pipe degradation, making water gentler on household plumbing. While the filter does not alter naturally occurring minerals like chloride itself, it works on water chemistry to protect your home's pipework, which your water test needs to confirm for your particular supply.
How does corrosive-inducing constituent enter groundwater or distribution system in Navajo County?
In Navajo County, the groundwater in aquifer 220NAVJ has been sampled multiple times for various characteristics. Chloride, a constituent that can influence corrosivity through its effect on water's ability to conduct electricity and interact with metals, was detected in all 40 sampled results across 14 wells. These wells ranged from depths of 554 to 3,737 feet, reflecting a broad section of the aquifer. Chloride presence here is naturally occurring or influenced by geological factors, entering the groundwater through dissolution of minerals and possibly limited surface influences. Importantly, these findings represent regional groundwater conditions, not any individual household's water supply.
How should Navajo County’s chloride records be compared with those of neighboring counties without overreading the data?
While comparing chloride levels across counties can provide insight into regional water characteristics, it is essential to avoid assumptions about individual wells. Navajo County’s chloride range extends from 1.67 to 117.0 mg/L with a median of 3.79 mg/L. Neighboring counties may show different ranges depending on local geology, aquifer characteristics, and sampling scope. The key is to view this data as an environmental snapshot: it informs about general conditions, not specific household water quality or safety. Homeowners should rely on their well water testing for their own supply details.
What do 'detected', 'median', and 'range' mean in the Navajo County water sampling record?
In the USGS groundwater sampling for Navajo County's aquifer 220NAVJ, chloride was detected in all samples, meaning instruments measured it every time. The median value of 3.79 mg/L indicates the middle concentration when all measurements are arranged from low to high, showing a typical level in the sampled wells. The range from 1.67 to 117.0 mg/L shows the lowest and highest measured values, highlighting variability across wells and time. None of these measurements exceeded any federal health-based thresholds, confirming that chloride levels here do not breach safety limits but could influence water’s taste, staining potential, or corrosion behavior.
How do sample depth, well depth, or source type affect what a Navajo County household should expect?
The wells sampled in Navajo County cover depths from several hundred to over three thousand feet, reaching different strata within the aquifer. Deeper wells may draw water with different mineral compositions than shallower ones, affecting chloride concentrations and corrosivity. Additionally, the type of water source, whether a private well or a public supply drawing from the same aquifer, can influence variability in water characteristics at the tap. A household’s actual water condition depends on their well specifics — depth, construction, and local geology — requiring targeted testing to determine corrosion potential with certainty.
This summary relies on 40 groundwater samples collected from 14 wells between June 2010 and August 2019 within Navajo County’s aquifer 220NAVJ. For full details and updates, refer to the U.S. Geological Survey groundwater data at the official monitoring location linked through the government site.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2019-08-23. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Chloride in the 220NAVJ aquifer (Navajo County): 40 results from 14 wells, median 3.79 mg/L, range 1.67-117.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.