Pentair Corrosive Water Damaging Pipes Filter

Buy Now

View full details

Corrosive water is constant and unchanging throughout the year

Contrary to what many believe, corrosive water levels are not fixed in Brunswick County. The U.S. Geological Survey sampled seven wells from September 2010 to September 2022. Their data shows chloride concentrations—the component related to corrosivity—vary over time and between wells. This variation means household water conditions may shift seasonally or over multiple years.

The chloride causing corrosive water originates solely from human activity

In Brunswick County’s aquifer 211PEED, chloride enters groundwater through natural mineral deposits and other environmental sources as well as human influences. The detected levels range widely because of these combined factors, reflecting local geology and land use rather than a single source. Understanding this helps clarify why corrosivity can differ even within nearby households.

A certified lab test for chloride will automatically indicate corrosive water severity

Testing your own water through a certified laboratory is necessary to understand your household’s water condition. Labs measure chloride in milligrams per liter (mg/L), reporting a specific concentration. While this result informs you about chloride presence, it alone does not determine corrosivity severity; additional factors like pH and total dissolved solids matter. Results are a snapshot, not a verdict.

Using Brunswick County data, what does median chloride of 11.7 mg/L mean for a homeowner?

The median chloride concentration from 57 samples is 11.7 mg/L, with values ranging from 5.47 to 285.0 mg/L. This means half the measurements fell below 11.7 mg/L and half above, but most samples were well below the higher end. Since only one sample exceeded the secondary standard of 250 mg/L—a guideline for taste and staining without health implications—typical household water in the area usually has chloride well under this aesthetic threshold.

What do the terms 'detected', 'median', and 'range' reveal about your water?

All 57 samples detected chloride, showing it is consistently present in Brunswick County’s aquifer 211PEED wells. 'Detected' means the instrument measured chloride above its minimum reporting level—not that it is unsafe. The 'median' gives a central value, while the 'range' shows the spread from lowest to highest sample. Together, these describe variability in chloride presence regionally but do not specify your well’s condition.

How the Pentair Corrosive Water Damaging Pipes Filter manages chloride’s impact

The Pentair system ships ready to configure and is designed to reduce the corrosive effects chloride can have on household plumbing. By treating water to limit pipe damage, it helps maintain fixture longevity and water quality. This technology addresses corrosion mechanisms relevant in regions like Brunswick County without relying on changing water chemistry or guesswork.

In summary, the decision to equip your household for corrosive water should begin with understanding local sampling records, recognizing the range and seasonality of chloride in Brunswick County’s aquifer 211PEED, and testing your own water to confirm conditions. The Pentair Corrosive Water Damaging Pipes Filter provides a documented approach to reduce corrosion risks identified through this data.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2022-09-21. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Chloride in the 211PEED aquifer (Brunswick County): 57 results from 7 wells, median 11.7 mg/L, range 5.47-285.0 mg/L; 1 above an AESTHETIC secondary standard only (secondary standard 250.0 mg/L (aesthetic)) - not a health finding