Fleck Blue-Green Copper Stains Filter

Buy Now

View full details

1. Observing Seasonal and Multi-Year Variation in Marion County's Copper Data

Marion County groundwater samples from the S100SURFCL aquifer, taken between January and August 2010, show copper concentrations ranged from 0.6 to 2.4 micrograms per liter across five wells. These samples, collected at depths between 2 and 31 feet, reveal fluctuations that can appear with changing seasons or over several years. These changes are common in groundwater and can affect the likelihood and severity of copper stains in household water systems.

2. Reading Median and Range: A Homeowner’s Example

The median copper concentration recorded was 0.75 micrograms per liter, meaning half of the detected samples fell below this point and half above. The range shows the lowest detected was 0.6 and the highest 2.4 micrograms per liter. As a homeowner, understanding these numbers helps you gauge typical copper presence in local water but does not confirm your own supply’s levels without individual testing.

3. Comparing Marion County's Record with Neighboring Areas Properly

When comparing Marion County's copper data to adjacent counties, consider that differences in geology, well depth, and sampling periods can lead to varying results. Avoid assuming your household water mirrors nearby areas exactly. Use regional data as an overview, not a direct measure of your water quality.

4. What “Detected,” “Median,” and “Range” Indicate in This Context

Of the 20 samples analyzed, copper was detected in 7 results and below reporting limits in 13. Detection means measurement instruments found copper at those levels, not that the water is unsafe or violates any regulations. The median offers a central tendency, while the range indicates variability, both helping set expectations but not dictating individual well conditions.

5. Differences Between Public Water System Records and Private Well Testing

Public system water records focus on compliance and wide-area monitoring, which may not reflect localized conditions. Private well owners need to conduct specific testing for accurate knowledge of their water’s copper content. Regional data do not substitute for this personal testing but provide a useful context for possible copper presence and stain risk.

6. Identifying Household Symptoms Truly Linked to Copper Stains

Typical copper stains appear as blue-green marks on sinks, fixtures, or laundry. If existing treatments are struggling to control these stains, it might be due to increased copper levels or flow changes in your household water supply. Not all discolorations are copper-related, so proper identification is key before seeking additional solutions.

For households in Marion County facing persistent copper stains despite current equipment, the Fleck Blue-Green Copper Stains Filter offers a documented way to address demand based on your own measurements. This system ships ready to configure, providing an effective step up in managing copper-related aesthetic issues.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2010-08-04. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Copper in the S100SURFCL aquifer (Marion County): 20 results from 5 wells, median 0.75 ug/L, range 0.6-2.4 ug/L; none above any federal threshold