Residents of Union County, Arkansas, relying on aquifer 124SPRT for their water supply face questions about arsenic presence based on regional groundwater data. It is important to understand what the U.S. Geological Survey's sampling results from the area do and do not reveal about your own household water quality. This guide walks through those nuances and outlines an effective treatment option.
1. How the documented treatment technology removes or neutralises the constituent
The C-Series Arsenic Filter operates by specifically targeting arsenic molecules in water to reduce their concentration. This technology uses a filtration process designed to capture arsenic particles, improving water quality for residential use. The system ships ready to configure for household water treatment and can be a key part of managing arsenic concerns once presence is confirmed.
2. What happens when this problem is left untreated for years, stated without exaggeration
Long-term exposure to elevated arsenic in drinking water, even at low levels that may be detected, has been linked in scientific studies to potential health issues. However, the regional data for Union County shows arsenic concentrations well below federal thresholds. Despite this, if arsenic were present in your household water at levels above recommended limits, untreated water could contribute to chronic exposure risks over many years.
3. A worked example: reading the record's median and range as a homeowner would
The U.S. Geological Survey collected 14 samples from 11 wells in Union County’s aquifer 124SPRT between July 2012 and September 2019. The median arsenic concentration was 0.055 micrograms per liter (µg/L), with a range from 0.04 to 0.07 µg/L. Only 4 of those samples showed detectable arsenic, while 10 were below the reporting limit. This means many wells in the area had arsenic levels so low they could not be measured precisely during sampling.
4. What the measured range means against the relevant federal standard, and what it does not mean
None of the samples from the area exceeded the federal maximum contaminant level (MCL) for arsenic in drinking water. It is crucial to understand that detection of arsenic in some samples does not imply any violation or unsafe condition for your household water. The data represent regional trends from wells between 260 and 771 feet deep, not your specific water source. To confirm your household water quality, individual testing is necessary.
5. What changes for a large household, a second home, or a seasonal property
House size and usage patterns influence how much treated water is needed to maintain safe and palatable household water. Larger households consume more water, which may necessitate a treatment system designed for higher flow. Similarly, second or seasonal homes may require consideration of water stagnation or variable arsenic levels depending on usage cycles. The C-Series Arsenic Filter can be matched to these needs based on your household’s profile and water usage.
In summary, regional groundwater sampling in Union County’s aquifer 124SPRT provides valuable information but is not a substitute for testing your own water source. The detected arsenic levels in the area are well below federal limits, yet individual wells can vary. For peace of mind and improved water quality, using a targeted treatment like the C-Series Arsenic Filter offers a documented solution.
For more detailed data, refer to the U.S. Geological Survey records for Union County aquifer 124SPRT at their monitoring location online.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2019-09-18. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Arsenic in the 124SPRT aquifer (Union County): 14 results from 11 wells, median 0.055 ug/L, range 0.04-0.07 ug/L; none above any federal threshold