At the kitchen faucet, residents of Connecticut tapping groundwater from aquifer 112DFSF might notice concerns about arsenic, a naturally occurring element detected in local wells sampled by the U.S. Geological Survey. These findings provide context for evaluating arsenic removal methods suitable for household water treatment.
How will treated water from the Autotrol Arsenic Filter differ at the tap?
Once water flows through the Autotrol System configured to reduce arsenic, its arsenic concentration is significantly lowered from whatever was originally present in the well water. This results in water that meets regulatory arsenic standards for safe consumption as defined nationally. The filter operates by selectively removing arsenic compounds without affecting other common minerals, maintaining water clarity and taste. Treated water typically appears clean and odorless, with no residual arsenic taste or discoloration at the tap.
What happens if arsenic in household water remains untreated over the years?
Arsenic is a trace element found naturally in some aquifers, including aquifer 112DFSF in Connecticut. Long-term consumption of water with elevated arsenic levels has been linked in scientific studies to certain health concerns. However, the sampled wells in this area showed arsenic ranging from 0.1 to 0.16 micrograms per liter, all below the federal maximum contaminant level of 10 micrograms per liter set to ensure safety. Untreated water with arsenic concentrations at or below these levels does not violate safety standards, but households relying on private wells should test their specific water to confirm levels before deciding on treatment needs.
How can I evaluate arsenic treatment capacity against my household’s daily water use?
Assessing treatment capacity involves understanding daily water demand and arsenic concentration in your specific well. The Autotrol Arsenic Filter is designed to handle typical household volumes efficiently, but exact capacity depends on factors such as flow rate and arsenic concentration. To match treatment capability to your needs, you should start with laboratory testing of your own water sample to determine arsenic levels accurately. Then compare those results to the filter’s documented removal performance to ensure the system’s capacity is adequate for your household water usage.
How is arsenic distinguished from commonly mistaken water quality problems?
Arsenic differs from other common water constituents such as iron or manganese, which often cause staining or taste issues but are separate from arsenic in chemistry and health impact. Unlike muddy or metallic taste complaints, arsenic is a colorless and odorless element, detectable only through laboratory analysis. Additionally, arsenic presence is not linked to water hardness or chlorine residuals. Because arsenic is chemically distinct, treatment technologies must be specifically designed for its removal, unlike general filtration systems targeting sediment or aesthetic issues.
How do public water system records differ from private well testing for arsenic?
Public water systems undergo frequent testing with results reported to regulatory agencies, ensuring compliance with arsenic standards. In contrast, private well owners are responsible for their own water quality testing. For aquifer 112DFSF in Connecticut, publicly available data from the U.S. Geological Survey’s area aquifer sampling shows low arsenic levels within safe limits. However, this data represents sample wells, not individual private wells. Because arsenic concentrations can vary significantly even within the same aquifer, private well users must conduct their own laboratory analyses to determine their specific arsenic levels and treatment needs.
Deciding how to address arsenic in household water involves reviewing regional data, testing your own supply, and comparing treatment options like the Autotrol Arsenic Filter. This approach ensures informed choices based on both area sampling results and your household’s unique water quality requirements.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2017-09-06. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Arsenic in the 112DFSF aquifer (FIPS 170): 3 results from 2 wells, median 0.15 ug/L, range 0.1-0.16 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.