Understanding Arsenic Occurrence in Hendry County Aquifer 112NRSD
Government groundwater monitoring conducted by the U.S. Geological Survey sampled 14 separate wells within Hendry County's 112NRSD aquifer between April and June 2019. These wells, ranging 10 to 16 feet deep, showed arsenic detected in every case with concentrations ranging from 0.64 to 4.2 micrograms per liter (µg/L). The median value across samples was 1.5 µg/L. Importantly, none of these measurements exceeded any federal arsenic concentration thresholds established for drinking water.
While these results demonstrate arsenic presence across the regional aquifer, it is essential to recognize that local water conditions can vary. The data represent area-wide sampling and do not directly describe the arsenic concentration in any specific water source, such as an individual commercial building's supply. To determine the arsenic level impacting a particular facility, dedicated water testing of that facility’s water source is required.
Why Arsenic Matters in Commercial Water Systems
Arsenic is a naturally occurring element that can enter groundwater through the dissolution of minerals. Even at low concentrations, concerns about arsenic focus on taste, odor, and health considerations over long-term exposure. Water operators managing entire buildings face the challenge of treating all water outlets supplied by the building's system, ensuring consistent water quality throughout.
Addressing arsenic in commercial buildings requires technology capable of handling significant water volumes while maintaining effective constituent reduction. Point-of-use systems treating individual fixtures are insufficient for comprehensive whole-building water treatment.
Testing Your Water for Arsenic
Because arsenic concentration can vary even within a regional aquifer, facility operators should arrange professional water sampling of their building’s water source. Testing should comply with analytical methods detecting arsenic at microgram per liter levels to inform appropriate treatment decisions.
Whole-Building Arsenic Reduction Using Reverse Osmosis
Advanced treatment technologies such as reverse osmosis are employed to reduce arsenic and other dissolved solids in commercial water systems. A scalable solution designed for large flow rates, the Water Softener Plus Commercial Reverse Osmosis System provides up to 3200 gallons per day capacity, suitable for serving entire buildings.
Reverse osmosis operates by forcing water through a semipermeable membrane that retains arsenic molecules alongside other contaminants, allowing clean water to pass through. This approach effectively reduces arsenic concentrations regardless of initial measured levels, aligning with water quality goals for comprehensive facility supply.
Why Choose a Commercial Reverse Osmosis System?
- Designed for high-volume, whole-building applications
- Consistent arsenic reduction across all building outlets
- Compact footprint suitable for commercial settings
- Ships ready to configure for integration with existing water infrastructure
Next Steps for Commercial Operators in Hendry County
Commercial water users concerned with arsenic based on regional aquifer data should begin with accurate water source testing to establish their facility’s specific arsenic levels. Once confirmed, implementing a whole-building water treatment system using reverse osmosis technology offers a proven method to reduce arsenic comprehensively.
Choosing a water treatment system with suitable capacity and technology ensures operational reliability and water quality for all points of use within the building. The Water Softener Plus Commercial Reverse Osmosis System's 3200 gallons per day output is engineered to meet these requirements in commercial environments drawing from aquifer 112NRSD in Hendry County.
Where this information comes from
Source: USGS groundwater sampling. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.