Fleck Acidic / Low-pH Water Filter

Buy Now

View full details

Long-Term Effects of Untreated Acidic Water

When acidic water is not addressed over many years, it can influence household plumbing and appliances. Acidic water may gradually interact with pipes and fixtures, potentially causing increased wear or metal leaching depending on pipe materials. These effects often develop subtly and can reduce the lifespan of plumbing components. Acidic water can also affect water taste and aesthetics, which might affect daily water use comfort.

Understanding Certified Laboratory pH Testing Results

A certified laboratory report for water acidity shows the pH, a measurement of hydrogen ion concentration indicating if water is acidic, neutral, or alkaline. The pH scale ranges from 0 (most acidic) to 14 (most alkaline), with 7 being neutral. In the Elmore County aquifer 112BRUN, U.S. Geological Survey tests showed all sampled wells with pH values between 7.5 and 8.3, typical of slightly alkaline water. A test report gives a precise pH value for your water, which is necessary to understand your specific water conditions.

Plumbing Material and Age Influence on Acidic Water Effects

The impact of acidic water is not only about the source's pH but also depends on plumbing materials and system age. Older homes often have metal pipes more sensitive to low pH water, which can increase the risk of metal dissolving into the water. Newer plumbing with plastic or coated pipes tends to be less affected by acidic water. This distinction means the same water can behave differently in different homes depending on plumbing composition and condition.

What the Regional pH Range Indicates and What It Does Not

The regional pH data from 53 samples across nine wells in Elmore County’s aquifer 112BRUN showed a median pH of 7.9 standard units within a range of 7.5 to 8.3. This is well within the EPA Secondary Standard range of 6.5 to 8.5, which focuses on water’s aesthetic qualities and corrosivity but is not related to health safety limits. No samples fell below 6.5, so acidic water with low pH was not detected regionally. However, this range does not predict your individual well’s pH; that requires a specific test. The data suggest that very acidic water is not common in this aquifer area but does not rule out localized conditions.

Source of pH Variation in Groundwater in Elmore County

The pH of groundwater in the Elmore County area aquifer 112BRUN is influenced by natural geological formations and water-rock interactions occurring at depths between 388 and 635 feet. These interactions can contribute alkaline minerals that tend to raise pH, making water closer to neutral or slightly alkaline. Human activities (such as agriculture or industry) may also affect water chemistry but were not indicated as factors in the USGS data. Understanding this natural background helps clarify why acidic conditions are not typical in this regional groundwater.

How the Fleck Acidic / Low-pH Water Filter Addresses Acidic Water

The Fleck Acidic / Low-pH Water Filter is designed to treat water with low pH by neutralizing acidity and reducing corrosive effects. It functions by adjusting the water chemistry to a more balanced pH level suitable for household use. This treatment helps protect plumbing and fixtures from potential acid-related damage and improves water taste and appearance. The system ships ready to configure for straightforward setup in your home’s water supply line without requiring specialized assistance.

What You Should Not Conclude From Area Data

While U.S. Geological Survey data for Elmore County’s aquifer 112BRUN show no acidic water below pH 6.5, this does not guarantee your household water shares this range. Individual well water chemistry varies due to localized conditions. Only a certified laboratory test of your own water can confirm its pH and acidity level. Regional data provide helpful context but are not a definitive diagnosis of your specific water quality.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2014-04-25. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of pH in the 112BRUN aquifer (Elmore County): 53 results from 9 wells, median 7.9 standard units, range 7.5-8.3 standard units; EPA secondary standard for pH is 6.5-8.5 (aesthetic/corrosivity, not health-based); 0 of 53 sampled results fell below 6.5