Fleck Acidic Water + Hard Water (Well) System

Buy Now

View full details

Local Government Water Sampling Data for Kent County Aquifer 112CLMB

According to the U.S. Geological Survey groundwater sampling for Kent County's aquifer 112CLMB, hardness, measured as calcium and magnesium, was detected in all 21 samples taken from 11 wells between 2011 and 2024. The median hardness was 65.2 mg/L, with a range from 37.6 to 187.0 mg/L. All wells sampled were between 9 and 100 feet deep. None of these results exceeded any federal health-based thresholds, indicating no regulatory concern for these constituents in the sampled area.

Impact on Large Households, Second Homes, and Seasonal Properties

In residences with larger water demands, including families with multiple bathrooms or properties used seasonally, water hardness and acid levels can affect the longevity and efficiency of water-using equipment more noticeably. Household systems experience greater wear from mineral buildup and acidic water if untreated. Seasonal or second homes may suffer from extended periods of stagnation where water quality issues intensify. Replacing failed equipment in these settings often requires consideration of both hardness and acidity for lasting water quality improvement.

Understanding Aesthetic Secondary Standards Versus Health-Based Limits

The federal government distinguishes between health-based limits and aesthetic secondary standards. Secondary standards for hardness relate to taste, staining, and mineral deposits but do not indicate health risks at detected concentrations. Hardness, as measured, affects water quality perception and plumbing condition but remains under health-based limits in Kent County aquifer samples. Acidic water can contribute to corrosion and plumbing damage but is not regulated as a health hazard at typical local levels.

Sample Size, Well Distribution, and Data Scope

The data from 21 hardness measurements across 11 wells provides a reasonable overview of the aquifer's typical water quality within Kent County, though it does not characterize any single well or household water condition. The range in values reflects natural variability by well and depth, reinforcing the need for individual water testing to determine specific household water characteristics before selecting treatment options.

How Treated Water Will Differ With the Fleck Acidic Water + Hard Water (Well) System

Water treated by the Fleck Acidic Water + Hard Water (Well) System, which features 32,000 grain capacity, addresses both hardness and acidity to result in water that reduces mineral buildup and lessens acidic effects on plumbing. After configuring this system, water at the tap typically shows improved softness and neutralized acidity, enhancing appliance lifespan and household water experience while preserving essential water quality within regulatory standards.

Distinguishing Acid and Hardness From Similar Water Quality Issues

The combined challenge of acid and hardness differs distinctly from problems such as iron staining or chlorine taste, which involve different chemical causes and treatment approaches. Acid and hardness primarily concern mineral content and pH balance, impacting plumbing and water feel rather than causing odors or coloration. Correct identification avoids misapplication of treatment methods aimed at unrelated water quality issues.

Influence of Sample Depth, Well Depth, and Water Source Type

Well depth and water source type influence hardness and acidity levels. The Kent County aquifer 112CLMB samples spanned wells from shallow to moderately deep (9 to 100 feet), contributing to observed variability. Shallow wells may show more direct surface influence, sometimes increasing variability in hardness and acidity. Understanding the source type guides expectations for water composition and helps select appropriate treatment, such as the Fleck system designed for local aquifer conditions.

In summary, government sampling in Kent County aquifer 112CLMB shows hardness consistently present yet within health standards and identifies acidity as a factor affecting water use but not documented as a health threat. These findings cover 21 samples from 11 wells over more than a decade. For more details, consult the U.S. Geological Survey groundwater monitoring location 391240075432001.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2024-07-30. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 112CLMB aquifer (Kent County): 21 results from 11 wells, median 65.2 mg/L, range 37.6-187.0 mg/L; none above any federal threshold