Interpreting the Median and Range of Hardness in Your Household Water
The U.S. Geological Survey sampling of groundwater wells from Douglas County's aquifer 100VLFL found hardness measured as calcium and magnesium in 40 samples from three wells, taken between 2010 and 2025. The median level was 6.305 mg/L, with results ranging from 5.6 to 192.0 mg/L across wells between 140 and 510 feet deep. This data reflects the general water quality within this aquifer but does not specify any single home's water concentration. Homeowners should conduct their own tests to determine precise local conditions.
How Depth and Well Characteristics Influence Your Water
Samples came from wells varying in depth from 140 to 510 feet. Such variation affects hardness levels because mineral content can differ substantially within an aquifer depending on depth and geology. For a household considering treatment, understanding your well's depth and configuration is important since shallower or deeper sources may yield water with different hardness and acidity characteristics than those captured in area-wide sampling.
How the Fleck Acidic Water + Hard Water (Well) System Addresses These Concerns
The Fleck System is designed to handle combined acidic and hard water conditions typically found in well water. With a grain capacity of 32,000, it treats water by reducing hardness minerals such as calcium and magnesium while also neutralizing acidity. This dual action helps protect plumbing, fixtures, and appliances from mineral buildup and corrosion effects caused by acidic water. The system ships ready to configure for household use and enables effective management of common water quality challenges in Douglas County.
What the Sampling Data Does and Does Not Indicate About Safety and Standards
No measured hardness levels in these samples exceed any federal thresholds for safety or health. Hardness is primarily an aesthetic and operational concern rather than a health risk. The detected levels indicate mineral presence but do not imply violation of legal limits or health dangers. The data also does not establish the acidity (pH) of the water directly. For a full assessment, measuring pH and individual well hardness remains necessary.
Distinguishing Acid and Hardness Issues from Other Water Quality Factors
Acid and hardness problems should not be confused with issues caused by other water constituents such as iron or manganese, which have different effects and treatment requirements. Hardness involves calcium and magnesium minerals that cause scaling, whereas acidity affects corrosion potential. Proper identification through testing helps select targeted treatment like the Fleck System, which focuses specifically on hardness and acid neutralization.
Clarifying What Area Data Does Not Reveal
The government sampling data for aquifer 100VLFL is valuable for understanding regional water quality tendencies but should not be used to assume the exact condition of any individual household’s water. Variations in well depth, local geology, and other factors mean home water testing is essential before choosing or configuring a treatment solution. The Fleck Acidic Water + Hard Water (Well) System offers a technically validated option for managing these problems once home water characteristics are known.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2025-12-09. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 100VLFL aquifer (Douglas County): 40 results from 3 wells, median 6.305 mg/L, range 5.6-192.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.