The U.S. Geological Survey groundwater samples taken from Dougherty County's aquifer 120FLRDU provide a clear picture of water hardness in this region. From 2010 through 2025, 66 results from 22 separate wells showed hardness levels ranging between 92.5 and 224.0 mg/L, with a median of 170.0 mg/L. These measurements were found in wells between 64 and 218 feet deep. No readings surpassed any federal thresholds, indicating compliance with regulatory standards for hardness components such as calcium and magnesium.
How Treated Water Changes at the Tap with the Fleck System
Once configured with the Fleck Acidic Water + Hard Water (Well) System, water at the tap experiences a reduction in hardness minerals, which can improve water's interaction with soaps and reduce mineral buildup. This system's 32,000-grain capacity is designed to handle substantial hardness levels like those characterized in Dougherty County, adjusting the water chemistry to mitigate the effects of acidity while softening the water effectively.
Considerations for Large Households, Second Homes, or Seasonal Properties
In homes with higher water demands, such as large families or seasonal residences, the Fleck System’s grain capacity supports efficient conditioning over extended periods before regeneration is needed. However, households with intermittent use should monitor water chemistry more closely, as stagnation may influence quality differently compared to continuous use.
Understanding 'Detected,' 'Median,' and 'Range' in This Sampling Record
'Detected' means hardness minerals were measured above instrument minimum levels in all sampled wells; it does not imply a problem or violation. The 'median' is the middle value of these hardness results, illustrating a typical concentration in the aquifer, while the 'range' shows variability from the lowest to the highest recorded hardness among sampled wells. These statistics describe area conditions, not individual wells, which require separate testing to determine specific water quality.
Additional Questions for Commercial or Industrial Operators
Commercial or industrial users might consider questions about water volume demands, influence on process equipment, and compliance with operational standards beyond residential needs. Their concerns often include the consistency of hardness removal and mitigating any acid effects that could impact machinery or manufacturing processes.
Fixtures and Appliances Most Sensitive to Acid and Hardness
In residential settings, fixtures such as faucets, showerheads, and water heaters commonly show early signs of mineral buildup or corrosion from acid and hardness. Appliances like dishwashers and washing machines can also be affected, experiencing reduced efficiency or lifespan. The Fleck System helps protect these by conditioning the water before it reaches these points of use.
In summary, Dougherty County's aquifer 120FLRDU presents a documented range of hardness values that homeowners should understand when considering treatment options. Testing your own well water is essential for tailored solutions, and the Fleck Acidic Water + Hard Water (Well) System offers a ready-to-configure approach to managing these water quality challenges effectively.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2025-12-15. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 120FLRDU aquifer (Dougherty County): 66 results from 22 wells, median 170.0 mg/L, range 92.5-224.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.