Fleck Acidic Water + Hard Water (Well) System

Buy Now

View full details

How the Fleck System Treats Acid and Hardness in Household Water

When deciding on equipment to manage acid and hardness in your household water, understanding how the technology works is key. The Fleck Acidic Water + Hard Water (Well) System is designed to handle both conditions simultaneously. It combines ion exchange processes that soften water by removing calcium and magnesium ions, which cause hardness, while incorporating media or processes that neutralize acidity. This dual-action helps protect plumbing and appliances from wear and discoloration often associated with acidic or hard water. The Fleck System ships ready to configure and offers a capacity of 32,000 grains, fitting many residential demand levels.

Interpreting the Local Groundwater Record for Your Home

The U.S. Geological Survey sampled 24 wells across FIPS 110 aquifer 112DFSF in Connecticut from 2011 to 2017, measuring hardness in milligrams per liter of calcium and magnesium. The median hardness was 141.0 mg/L, with levels ranging from 15.6 to 564.0 mg/L. This wide range reflects natural variability between wells 10 to 155 feet deep. As a homeowner, these figures indicate that the area’s groundwater commonly contains measurable hardness. It also shows that water quality can vary significantly from one well to another within the same aquifer.

Understanding Certified Lab Testing for Hardness and Acid

To know your own water’s hardness and acidity, a certified laboratory can analyze your sample. Their report will show concentrations of calcium and magnesium contributing to hardness, typically in milligrams per liter or grains per gallon. Acidity is often reported via pH or related measures. This official test is essential because regional data does not substitute for your well’s specific conditions. The lab results help determine if treatment like the Fleck System is appropriate for your household’s water.

Adjusting Treatment for Larger or Seasonal Households

Households with more occupants or higher water use may require systems with greater capacity or higher throughput. The 32,000-grain capacity of the Fleck System suits many residential uses but might need supplementation or multiple units for very large demand or seasonal homes with fluctuating occupancy. Planning for such changes ahead ensures continuous effective treatment regardless of household size or usage patterns.

What the Regional Measurement Range Means—and Doesn’t Mean

The recorded hardness levels in the aquifer samples do not represent your individual well’s quality. Neither the lowest nor the highest values should be assumed present at your tap without testing. Also, no measurement in this dataset exceeded federal standards; hardness itself is not regulated as a health risk but affects taste, staining, and appliance longevity. The data indicates the presence of hardness and acidity in the area, but it does not diagnose water safety or the exact condition of your supply.

What You Should Not Conclude

The regional data on acid and hardness is informative but not definitive for your household water. Only a certified laboratory test of your own source can provide the specific information needed to choose and configure treatment. The Fleck Acidic Water + Hard Water System offers a proven option for managing these concerns when your water shows elevated hardness or acidity. Use the government sample results to understand area trends, then rely on direct testing for your precise water profile.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2017-09-05. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 112DFSF aquifer (FIPS 110): 24 results from 20 wells, median 141.0 mg/L, range 15.6-564.0 mg/L; none above any federal threshold