Fleck Well Rust + Hardness System

Buy Now

View full details

1. Review the data behind reported water quality figures

Water quality information for Glynn County’s aquifer 120FLRDU comes from 22 iron measurements collected from 9 wells between late 2014 and late 2016. These wells were sampled at depths ranging from 724 to 1004 feet. While this is a modest dataset, it reflects the area's groundwater characteristics rather than conditions in any one well. A small number of samples means you should treat the results as an indicator of regional water quality trends, not a precise depiction of your own well water.

2. Understand what a laboratory report for iron shows and how to interpret it

A certified lab report for iron in well water typically lists the concentration in micrograms per liter (ug/L). For Glynn County, these reports show iron detected consistently across samples, with individual results ranging from 9.4 to 61.3 ug/L and a median of 32.85 ug/L. This means instruments measured iron presence but did not find any values that exceed federal thresholds. Reading such a report involves noting the concentrations, recognizing that detection is not a safety violation, and considering how these levels might relate to water appearance and staining.

3. Compare Glynn County’s iron figures to nearby areas without exaggeration

Iron results in Glynn County provide a baseline for regional groundwater quality, but comparing with neighboring counties requires caution. Differences in geology, sampling methods, and well depths influence iron levels. This area’s moderate iron range should not be assumed identical elsewhere. Such comparison helps understand whether your water conditions are typical for the broader region but does not substitute for testing your specific water source.

4. Learn how treatment technology addresses rust and hardness in water

The Fleck Well Rust + Hardness System is designed to reduce iron and hardness-related issues commonly observed in well water. It works by filtering iron particles and softening calcium and magnesium minerals that cause water hardness. This reduces rust stains on fixtures and the mineral build-up that disrupts water quality. The system ships ready to configure, allowing households to manage rust and hardness with a capacity suited for significant usage levels.

5. Distinguish aesthetic secondary standards from health-based limits for iron

Iron in water is regulated mainly for aesthetic factors like color, taste, and staining, not direct health risk. The federal iron threshold relates to water appearance and infrastructure impact rather than safety. Detected iron below this threshold indicates typical mineral content, which some find undesirable for plumbing and laundry but not harmful. Understanding this distinction helps prevent needless concern about safety when iron is simply present below recommended levels.

6. Evaluate treatment capacity relative to household water demands

When considering treatment, compare the system’s grain capacity against your daily water use. The Fleck Well Rust + Hardness System handles up to 32,000 grains before regeneration is necessary. Households can estimate daily hardness load by testing their water and assessing volume use. Matching treatment capacity to demand ensures consistent performance in managing rust and hardness without overloading the system.

By following these steps, residents can interpret regional water quality data thoughtfully and make informed decisions about treating well rust and hardness. The Fleck Well Rust + Hardness System offers a documented solution designed to meet demand and improve water quality based on measured needs.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2016-12-07. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Iron in the 120FLRDU aquifer (Glynn County): 22 results from 9 wells, median 32.85 ug/L, range 9.4-61.3 ug/L; none above any federal threshold