Fleck Uranium & Radium System

Buy Now

View full details

Does the Range of Uranium Concentrations in Madison County Wells Indicate a Health Risk at Home?

Government groundwater monitoring in Madison County's aquifer 110QRNR shows uranium detected consistently in 14 samples from 11 wells, ranging from 0.026 to 11.5 micrograms per liter (ug/L). The entire set of measurements falls below all federal regulatory thresholds. This means the regional data do not indicate a violation or unsafe condition according to federal standards, though individual household water supplies require their own testing for precise assessment.

How Should You Interpret the Median and Range Values as a Madison County Homeowner?

The median uranium concentration in the sampled wells is 1.18 ug/L, which represents the middle concentration level among the results taken over more than a decade. Values from 0.026 up to 11.5 ug/L show natural variation in this aquifer's water. For your household, this suggests uranium is present at varying levels in the regional groundwater, but without direct testing of your own well, the specific concentration in your home water cannot be known. Existing treatment equipment might have reduced uranium levels previously, but rising concentrations in source water or system capacity limits can make maintaining those improvements challenging.

How the Fleck Uranium & Radium System Addresses Uranium and Radium in Residential Water Supplies

The Fleck Uranium & Radium System is designed to reduce uranium and radium from household water using a technology compatible with typical residential flow demands. It offers a grain capacity of 32,000, indicating robust capability to handle contaminant loads before media replacement or regeneration is needed. This system ships ready to configure, providing an adaptable solution when existing equipment no longer meets household water quality goals for uranium-radium constituents.

What Changes to Expect in Tap Water Quality After Employing the Fleck Uranium & Radium System

Once the Fleck System is set up in your home water treatment, you can expect lower uranium and radium levels at the tap, improving water aesthetics and potentially reducing any associated taste or staining issues over time. Treated water will reflect the system’s ability to adsorb and remove these constituents from the source water, assuming proper system capacity and maintenance aligned with household usage.

Why Plumbing Materials and Age Affect Uranium-Radium Levels Separately from Source Water Conditions

While the groundwater source defines uranium and radium concentrations entering your home, plumbing material and its age can influence their behavior after water leaves the source. Older plumbing or certain materials might contribute to changes in water chemistry, including minor leaching or alterations of contaminant forms, but these effects are distinct from the aquifer chemistry shown in regional testing. Understanding both source water quality and household plumbing conditions is important for overall water management.

Final Step: Confirming Your Household Uranium and Radium Levels

To know the uranium and radium concentrations specific to your home water supply in Madison County, the definitive step is to order a certified lab test of a sample from your own well or tap. A result at or below federal guideline levels would indicate no need for increased treatment beyond what is currently in place. If levels approach or exceed thresholds, considering the Fleck Uranium & Radium System can provide a documented method to regain control over water quality challenges.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2023-08-23. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Uranium in the 110QRNR aquifer (Madison County): 14 results from 11 wells, median 1.18 ug/L, range 0.026-11.5 ug/L; none above any federal threshold