Fleck Uranium & Radium System

Buy Now

View full details

Interpreting the Median and Range of Uranium-Radium Levels for Your Home

The U.S. Geological Survey conducted groundwater sampling in Gloucester County's aquifer 121CKKD between 2010 and 2018. Results from 38 tests across 31 wells showed radium-228 detected in every sample, with values ranging from 0.14 to 6.8 picocuries per liter (pCi/L) and a median concentration of 1.61 pCi/L. These figures describe what was measured in this regional aquifer area and do not indicate your own well's uranium or radium levels.

The median value means half the sampled wells had radium-228 below 1.61 pCi/L, while the range shows variability from very low to moderately higher concentrations within the area. Importantly, none of the samples exceeded federal thresholds for uranium-radium levels, so this data does not identify any regulatory violations for Gloucester County's aquifer.

What Treated Water from Your Home Tap Will Be Like After Using the Fleck System

Once equipped with a Fleck Uranium & Radium System, the water you use daily will have uranium and radium levels significantly reduced through the system’s filtration capabilities. Treated water will not exhibit the minerals associated with uranium and radium, improving overall water quality and addressing concerns about these naturally occurring radioactive elements.

This water reduction process occurs throughout the treated volume until the system's 32,000-grain capacity approaches its limit, after which maintenance steps will be needed to restore full performance. The system ships ready to configure for your household and works continuously to lower uranium and radium content before water reaches your taps.

Recognizing Which Household Water Issues May or May Not Indicate Uranium-Radium Presence

Radium and uranium presence in water does not typically cause noticeable taste, odor, or staining issues. Therefore, symptoms like discoloration, metallic taste, or unusual smells in your tap water are unlikely to be related directly to uranium-radium content.

Conversely, concerns about radioactive constituents require chemical testing to confirm, as visual or sensory cues do not reliably indicate the presence or levels of uranium and radium. Testing your own well water through a certified laboratory is necessary to establish whether uranium or radium are present at concentrations relevant to your household.

How Variation in Sample Depth, Well Construction, and Source Type Influences Expected Uranium-Radium Levels

The U.S. Geological Survey’s sampled wells in Gloucester County ranged from 17 to 162 feet in depth. Uranium and radium concentrations can vary depending on factors like aquifer composition, well depth, and water source type. Deeper wells might access different water strata with varying mineral concentrations compared to shallower ones.

For households, this means that knowing your well's construction details and testing source water is vital to understanding your specific uranium-radium levels. Area sample results provide context but cannot predict an individual well’s condition.

How the Fleck Uranium & Radium System Effectively Removes These Elements from Household Water

The Fleck System reduces uranium and radium by exchanging ions in its filtration media, capturing these elements from incoming water before it reaches your faucets. Its 32,000-grain capacity supports sustained removal over time for typical residential water demand.

This technology acts directly on dissolved uranium and radium, reducing their concentrations to below detectable or actionable levels according to treatment objectives. The system ships ready to configure for seamless integration into household water treatment setups.

Understanding the Sampling Scale Behind These Uranium-Radium Figures and What Limited Data Means

The median and range figures are derived from 38 samples taken from 31 wells across Gloucester County's aquifer 121CKKD, collected over an eight-year period. Although comprehensive for regional assessment, this sample size cannot capture every variation in the aquifer.

Sampling over multiple years and wells offers a reliable regional snapshot but emphasizes the importance of individual well testing. Personal water conditions may differ significantly due to unique local geology or well construction.

What You Should Not Infer from Area Uranium-Radium Data Alone

While government sample data from Gloucester County's aquifer provides useful context, it does not establish your own water quality or uranium-radium levels. Detected presence of radium-228 in regional samples is not a violation or an indication of unsafe water, and measurements below federal thresholds mean no regulatory exceedance was found.

To decide on the most suitable water treatment option for your household, you need specific lab testing of your well water. The Fleck Uranium & Radium System offers a documented solution for reducing these elements once confirmed present at concerning levels. Without your own water test, area data alone should not guide your purchase or treatment decisions.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2018-09-04. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Radium-228 in the 121CKKD aquifer (Gloucester County): 38 results from 31 wells, median 1.61 pCi/L, range 0.14-6.8 pCi/L; none above any federal threshold