Before Seeking Treatment Advice: What to Record
Existing Equipment Performance
Note that your current setup is operational but struggling to maintain water quality. This detail helps assess capacity needs.
Water Source Confirmation
Document if your water comes from a well drawing from the AZ aquifer, as this defines the data reference region.
Recent Water Testing Results
Obtain lab results from your own well to establish exact constituent levels; area samples only provide general context.
Changes at the Tap After Treatment with the C-Series System
Improved Water Clarity and Taste
The C-Series Total Well Chlorination System helps manage constituents affecting taste and clarity as observed in the local aquifer.
Reduced Staining Potential
While some area wells showed chloride levels above an aesthetic secondary standard, the treatment system lowers factors that cause staining on fixtures.
Interpreting Regional Sampling Data
What 'Detected' Indicates
All 37 regional samples detected chloride; detection means presence, not unsafe levels.
Median and Range Explained
The median chloride concentration was 52.6 mg/L, with results ranging from 4.7 to 1720.0 mg/L across 30 wells. This shows natural variability but is not a direct indication of your well's content.
Secondary Standards Context
Eleven samples exceeded the 250 mg/L chloride secondary standard, a taste and staining guideline—not a health limit or violation.
How the C-Series System Addresses Constituent Concerns
Oxidation and Neutralization Processes
The system uses controlled chlorination to reduce organic and inorganic challenges common in total well water.
Grain Capacity and Treatment Scale
Designed for residential use, the C-Series system handles up to 32,000 grain capacity, sufficient for typical household well demands exceeding existing equipment's capability.
Maintenance Cycle of the C-Series Total Well Chlorination System
Routine Checks and Media Replacement
Regular monitoring of system components and scheduled media renewal maintain treatment effectiveness and water quality consistency.
Simple Operation Requirements
The system ships ready to configure, simplifying household management without requiring specialized service visits.
Additional Considerations for Commercial or Industrial Operators
Higher Volume and Regulatory Compliance
Commercial users must factor in larger water volumes and stricter regulations beyond residential scope.
Customized System Scale
Industrial contexts often need tailored capacity and multi-stage treatment beyond standard residential systems like the C-Series.
This page reflects U.S. Geological Survey data from wells sampled in the AZ aquifer region over 2010 to 2024. For exact water constituents in your well, specific testing is necessary. Source details: https://waterdata.usgs.gov/monitoring-location/AZ014-332821112065101/.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2024-12-18. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Chloride in the aquifer (FIPS ): 37 results from 30 wells, median 52.6 mg/L, range 4.7-1720.0 mg/L; 11 above an AESTHETIC secondary standard only (secondary standard 250.0 mg/L (aesthetic)) - not a health finding