Pentair Total Well Chlorination System

Buy Now

View full details

How Treated Water Differs at the Tap with the Pentair Total Well Chlorination System

Arapahoe County relies on water from the 111ALFP aquifer to supply many household wells. This aquifer’s water infiltrates from local surface and groundwater recharge. Before water reaches household taps, it carries dissolved substances traced by U.S. Geological Survey sampling. For example, chloride was detected consistently in area wells sampled between 2010 and 2025, with concentrations ranging from 53.5 to 181.0 mg/L. While these figures reflect the aquifer zone rather than individual wells, they indicate a baseline of dissolved constituents that can affect water taste and plumbing over time.

When a documented treatment technology like the Pentair Total Well Chlorination System is applied, the resulting water quality changes beyond the raw source. This system is designed to mitigate microbial concerns through chlorination, targeting the full volume of well water. Treated water typically shows improved microbiological safety profiles, while the underlying dissolved solid content measured by chloride remains as part of the source water character. Chlorination does not remove dissolved solids but helps prevent biological growth that might occur after water leaves the well.

Maintenance Rhythm of the Pentair Total Well Chlorination System

For households considering this technology, maintenance focuses on periodic replenishment and checks connected to its 32,000-grain capacity. Regular monitoring maintains the system’s disinfection effectiveness by ensuring chlorine supply and system function align with household usage. The maintenance interval depends on water demand and system capacity but typically follows scheduled supply replacement in direct relation to treated water volume. This straightforward regimen helps sustain continuous treatment without complicated servicing.

Rule-Out Sequence: From Simple Checks to Certified Laboratory Testing

Before selecting treatment, households should start with basic evaluations. First, inspect well and plumbing condition visually for obvious issues like leaks or damage. Next, use simple at-home water tests for indicators such as turbidity or chlorine residuals. Given the aquifer’s documented chloride range, taste and staining concerns may warrant focused examination. Finally, certified laboratory testing provides detailed constituent profiles, including chloride and microbial analysis specific to the household well. Because regional aquifer sampling cannot substitute for testing the on-site well, these lab results are essential to guide treatment choice.

Impact of Plumbing Material and Age Separate from Source Water Quality

Plumbing infrastructure affects water quality perceived at taps independently of aquifer chemistry. Older pipes may contribute metals or harbor biofilms altering taste and safety, while newer materials generally maintain better water integrity. The Pentair Total Well Chlorination System addresses microbial control in the water but does not remediate pipe-related issues. Therefore, resolving total well water concerns may require plumbing evaluation alongside source water treatment. Differentiating between source water variables and plumbing influences prevents misattributed water quality problems.

Understanding 'Detected,' 'Median,' and 'Range' in the Government Sampling Record

U.S. Geological Survey sampling in Arapahoe County’s 111ALFP aquifer shows chloride detected in all 181 samples from three wells with a median of 138.0 mg/L and a range of 53.5 to 181.0 mg/L. Detection means instruments measured chloride in each sample; it is not an indication of violation or unhealthiness. The median value represents the middle concentration among samples, while the range shows the lowest to highest recorded values. These descriptors provide context about aquifer conditions but do not reflect the specific water quality of any one private well. Only certified testing of individual wells can define household water composition accurately.

This briefing outlined how chlorination treatment alters tap water, the maintenance involved with the Pentair Total Well Chlorination System, and a stepwise diagnostic approach beginning with simple checks before laboratory testing. It emphasized separating plumbing effects from source water chemistry and explained interpreting regional sampling data. Households weighing treatment options for total well water in Arapahoe County should use this information alongside certified well testing to determine the best course toward safe, reliable water supply.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2025-12-12. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Chloride in the 111ALFP aquifer (Arapahoe County): 181 results from 3 wells, median 138.0 mg/L, range 53.5-181.0 mg/L; none above any federal threshold