What Public Water-System Records Show Versus Private Well Testing
The U.S. Geological Survey has sampled groundwater from aquifer 112MRVA in Leflore County, measuring mineral content relevant to soap lather at multiple well sites. These samples represent an area-wide profile from various wells, not individual household water supplies. Public records provide median and range data for the county’s aquifer, but they cannot specify conditions inside your home tap without a direct water test from your private well or connection.
Scope of Sampling: Number of Wells and Samples and Implications
Data comes from 21 samples collected from 12 separate wells between 2016 and 2020. These wells vary notably in depth from 28 to 220 feet, reflecting different local hydrogeological conditions. This limited set offers a snapshot rather than a comprehensive, uniform water quality profile, emphasizing the differences one household may experience depending on their precise source and depth.
Interpreting the Measured Range Relative to Federal Guidelines
Calcium and magnesium levels, key contributors to soap lather resistance, ranged from 41.6 to 464.0 mg/L with a median of 230.0 mg/L in the recorded samples. None of these results exceeded any federal health-based threshold, confirming that all detected levels fall within safe consumption parameters. However, the range indicates variability that can influence soap effectiveness locally, particularly at the higher concentrations.
Judging Treatment Needs Based on Daily Household Water Use
Understanding how much water your household uses daily helps determine what capacity of a treatment approach would be effective. While this record does not include flow rates, knowing your water volume demands combined with water mineral content testing can guide selecting a system designed to improve soap lather. The technology must be compatible with both your water chemistry and daily water volume to ensure consistent performance.
Example Reading: Median and Range as a Homeowner in Leflore County
Using the median concentration of 230 mg/L from the Leflore aquifer samples, a homeowner might expect moderately elevated mineral content that can interfere with soap’s ability to lather well. The upper range value points to some locations experiencing significantly higher minerals, potentially causing more noticeable soap lather issues. This variability highlights why testing your specific household water is crucial for effective problem resolution.
Overall, the groundwater sampling from Leflore County's aquifer 112MRVA documents a mineral presence consistent with common water lather challenges but confirms all levels are below federal health thresholds. To address soap lather inefficiency, the Autotrol Soap Won't Lather System ships ready to configure for home use and is designed to mitigate the minerals that reduce soap performance.
These findings are sourced directly from the U.S. Geological Survey groundwater monitoring data for Leflore County, aquifer 112MRVA: https://waterdata.usgs.gov/monitoring-location/333224090114002/
Where this information comes from
Source: USGS groundwater sampling. Sampled 2020-07-23. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 112MRVA aquifer (Leflore County): 21 results from 12 wells, median 230.0 mg/L, range 41.6-464.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.