How Treated Water Differs at the Tap with the C-Series Soap Won't Lather System

Reduction of Soap-Interfering Minerals

The C-Series Soap Won't Lather System addresses the calcium and magnesium minerals commonly found in Cleveland County’s aquifer 317GBWG, which affect how soap forms lather. By modifying these minerals, water treated by the system encourages better soap performance without relying on harsh chemicals.

Improved Soap Efficiency

Once water passes through the system, soap mixes with fewer soap-reactive minerals, allowing lather to develop more readily and persist longer during washing tasks.

Household Symptoms That Do and Do Not Indicate Soap Lather Mineral Problems

Symptoms Commonly Linked to Soap Lather Difficulty

• Soap that forms less foam or suds than expected during bathing or dishwashing
• A feeling of soap residue on skin or surfaces after rinsing
• Soap requiring noticeably larger amounts to achieve lather

Symptoms That May Not Be Related to Water Minerals

• Soap that smells or looks unusual, which might be caused by soap formulation changes
• Water temperature or hardness unrelated to mineral content, such as cold water affecting soap behavior
• Issues with plumbing materials or buildup not directly tied to water minerals

What Changes for Different Household Types

Large Households

With more frequent water use, mineral interactions with soap can accumulate, making consistent soap lather performance more critical.

Second Homes or Seasonal Properties

Extended periods of non-use can affect water quality in pipes but do not change mineral levels in the aquifer. Soap lather issues may vary with water stagnation effects rather than mineral content.

Understanding 'Detected', 'Median', and 'Range' in Cleveland County Water Sampling

Detected

Calcium and magnesium minerals were detected in all sampled wells, meaning instruments measured these minerals consistently in Cleveland County’s aquifer 317GBWG.

Median

The median water hardness measured was 35.2 mg/L, representing the middle value across samples. This indicates a central tendency but does not define any single household’s water.

Range

Sample results vary from 9.51 to 270.0 mg/L in water hardness, showing that mineral levels differ among sampled wells between 200 and 200 feet deep.

Worked Example: Reading the Samplings as a Homeowner

Interpreting Median and Range

The median of 35.2 mg/L suggests moderate mineral presence in the regional aquifer, which can influence soap lather. However, the wide range up to 270.0 mg/L means some locations may experience much higher mineral levels, emphasizing the need for individual water tests.

Applying This to Your Home

Understanding that your own water may fall anywhere within this range is key to deciding if a system like the C-Series Soap Won't Lather System can assist with improved soap use.

What Not to Conclude from Cleveland County’s Regional Mineral Data

These government results describe area aquifer sampling only and do not determine the exact makeup of any individual household’s water. Detection of minerals is normal and does not indicate unsafe or noncompliant water. If you have soap lather concerns, testing your home’s water hardness directly is necessary before selecting a treatment approach.

The C-Series Soap Won't Lather System ships ready to configure for residential needs and offers a documented technology to ease soap lather difficulties related to mineral interactions in water.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2013-03-13. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 317GBWG aquifer (Cleveland County): 5 results from 2 wells, median 35.2 mg/L, range 9.51-270.0 mg/L; none above any federal threshold