42 Fiberglass Tanks - Twin Unit Skid

Buy Now

View full details

If You Consider New Hanover County Aquifer Data Reliable but Sample Size Is Small

The U.S. Geological Survey collected 12 hardness results from 10 wells in New Hanover County’s 110QPLC aquifer between 2012 and 2017. These wells were 13 to 45 feet deep, providing a snapshot of groundwater in this area but not a direct measurement of your own water supply. The median hardness was 61.2 mg/L with a wide range from 15.0 to 215.0 mg/L.

Because this is a limited sample size and comes from individual wells scattered across the county, it offers valuable but incomplete insight. For a commercial operator deciding on water treatment due to sensitive skin concerns, testing your own water source is essential to understand your exact conditions. The local data does not indicate any federal standard exceedance for hardness, which suggests no regulatory violation for this aquifer. However, hardness levels can affect water feel and irritation potential independently from safety considerations.

If You Observe Skin Sensitivity or Irritation in Your Facility

Skin irritation or sensitivity can have multiple causes, and attributing it solely to water hardness involves careful observation. Hardness in water involves calcium and magnesium ions, which can leave deposits that affect skin feel or exacerbate existing sensitivities. Symptoms consistent with hardness issues include dryness, redness, or itching linked to water contact periods.

However, if these symptoms appear inconsistently or relate to chemicals, detergents, or other environmental factors, hardness may not be the primary cause. For commercial operations, sensitive skin concerns might also stem from repeated exposure or occupational factors distinct from household scenarios.

If You Are a Commercial Operator, What Additional Questions Matter

Unlike residential users, commercial operators must consider volume, water pressure, and system downtime in their treatment decision. Questions to evaluate include:

• What is the daily water volume used in operations?
• Are there any skin-contact processes where water quality directly affects worker comfort or product quality?
• What is the facility’s capacity to monitor and maintain treatment equipment?
• Does the treatment solution need to handle fluctuations in raw water quality over time?

These factors influence the choice of equipment class and treatment configuration needed to address sensitive skin concerns effectively in a commercial setting.

If You Want to Understand How Treated Water Feels and Acts at the Tap

Once treated with a commercial system skid featuring 42 fiberglass tanks on a twin-unit skid, water’s hardness components—calcium and magnesium—are adequately managed to reduce their impact on skin exposure. The treated water feels softer, which may help alleviate irritation for sensitive skin. Treatment does not eliminate minerals but adjusts their concentration to minimize adverse effects.

The system ships ready to configure, ensuring that it can integrate into your facility’s water supply to provide smoother, less abrasive water contact. This adjustment can improve worker comfort and reduce skin sensitivity complaints linked to hardness-related water quality.

If You Track the Hardness Range Against Federal Standards

The hardness results from the sampled area in New Hanover County’s 110QPLC aquifer all fall below federal health thresholds. These standards are not safety limits but serve to inform water use considerations. In this case, no sample exceeded any federal threshold. This confirms that the hardness measured does not represent a safety concern as regulated by federal health protections.

Understanding this helps you focus on treatment for comfort and sensitivity rather than safety compliance. It is still important to verify your own water’s hardness, as levels can vary significantly even within an area.

If You Need to Distinguish This Sensitive Skin Issue from Other Common Water Concerns

Sensitive skin related to water quality is often confused with problems caused by irritants such as chlorine, other chemicals, or water temperature. Unlike chemical irritants, hardness does not introduce a pathogen or toxin. It more commonly affects skin through mineral deposits and water feel.

Additionally, corrosion or staining issues, though related to water chemistry, differ from sensitive skin concerns. Corrosive water may damage pipes but does not directly cause skin irritation. Identifying the exact cause of skin sensitivity ensures that the treatment chosen specifically targets the relevant water quality factor.

For commercial operators in New Hanover County facing uncertainty about appropriate measures for water-related sensitive skin, selecting a solution designed for your specific demand is critical.

The 42 Fiberglass Tanks - Twin Unit Skid commercial system skid provides configurable treatment capacity suitable for varying hardness levels found locally. It offers a practical choice to address sensitive skin concerns based on your facility’s measured conditions, balancing treatment efficiency and operational needs.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2017-05-18. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 110QPLC aquifer (New Hanover County): 12 results from 10 wells, median 61.2 mg/L, range 15.0-215.0 mg/L; none above any federal threshold