A laboratory test report for hardness in Burke County's aquifer 125DBMV typically lists concentrations of calcium and magnesium expressed in milligrams per liter (mg/L). These measurements inform how water interacts with plumbing, appliances, and daily use.
How Sample Depth, Well Depth or Source Type Changes What a Reader Should Expect
Sampled Wells Were Deep in the Aquifer
The hardness data comes from wells ranging 867 to 940 feet deep below ground. Such depth may influence water composition compared to shallower sources, although these figures represent an average condition in the aquifer, not specific wells.
Water from Deep Aquifers Often Has Distinct Mineral Profiles
Hardness in this range can cause mineral buildup over time but usually varies among wells depending on local geology and well characteristics.
How Many Samples and Wells Stand Behind the Figures, and What a Small Sample Means
Ten Hardness Results Were Taken from Two Wells Over Two Years
The data set includes 10 measurements from two separate wells sampled between April 2011 and August 2013. This small number of wells limits the geographic precision and variability representation but provides a baseline for regional water hardness.
Median Hardness Was 43.65 mg/L, Range 27.6 to 65.4 mg/L
This range indicates moderate hardness levels common in the area’s groundwater. None of the samples exceeded any federal thresholds for hardness, confirming no exceedance of regulatory limits.
How to Judge Treatment Capacity Against the Household's or Facility's Daily Demand
Consider Household Water Use When Selecting Capacity
Salt-free water softening systems like the Pentair Salt-Free Scale Control System handle mineral scale differently than traditional softeners. Capacity should be matched to daily water volume to ensure effective scale control without salt use.
Water Hardness Variability Affects Treatment Performance
Higher hardness levels require systems sized for the expected peak hardness and volume. The Burke County medians and range help estimate what typical capacity is appropriate for residential households.
What Questions a Commercial or Industrial Operator Adds That a Household Does Not
Commercial Users Should Examine Continuous Monitoring Data
Facilities with high or variable water demand often need ongoing hardness monitoring and may require different system sizing or supplementary scale management methods.
Households Typically Focus on Single-Point Testing and Usage Patterns
Residential users benefit most from a reliable hardness test of their own water and selecting a salt-free system that manages this moderate hardness range efficiently.
How Seasonal or Multi-Year Variation Shows in the Record (Dates and Ranges Given)
Sampling Span Covers Over Two Years, Indicating Stability
The 2011-2013 sample period shows a consistent pattern in hardness values, with no extreme fluctuations noted in the recorded data. This suggests relatively stable water quality over time in the sampled wells.
Variability Within the Range Reflects Natural Fluctuations in Groundwater
Minor deviations in hardness levels are expected due to changing aquifer conditions but are unlikely to affect system performance significantly within typical residential demand.
Final Step: Test Your Own Water
To determine if a salt-free water softening system like the Pentair Salt-Free Scale Control System suits your household, order a hardness test of your personal water source. A result in line with the Burke County medians can guide effective selection and sizing of scale control equipment.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2013-08-14. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 125DBMV aquifer (Burke County): 10 results from 2 wells, median 43.65 mg/L, range 27.6-65.4 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.