Fleck Radon in Water Filter

Buy Now

View full details

What a Laboratory Test Report for Radon Will Actually Show

If you send a water sample from your household well in Saratoga County to a lab for radon analysis, the report will provide the concentration of radon-222 in picocuries per liter (pCi/L). This number is specific to your well and reflects only the moment your water was tested. Government data from 2011 to 2022 sampled 16 radon results from eight wells in the local 112SDGV aquifer, reporting radon levels ranging broadly from 8.0 to 500.0 pCi/L, with a median value of 89.0 pCi/L. These samples were taken from wells between 28 and 641 feet deep. None of these government-tested results were above federal radon thresholds. However, this data alone does not establish the radon level in your home’s water supply; your well will need a separate test for that specific information.

How Treated Water Differs at the Tap After Using the Fleck Radon in Water Filter

When water passes through the Fleck Radon in Water Filter, the radon content is reduced by the system’s specialized filtration method designed to remove dissolved radon gas from well water. As a result, water coming from your household taps will have significantly lower radon levels, reducing any potential exposure through ingestion or inhalation of radon that can be released during water use. The treatment process does not add chemicals or change the water’s appearance or taste noticeably but targets radon specifically, providing peace of mind if your existing water treatment equipment has failed to control radon effectively.

Maintenance Rhythm of the Fleck Radon in Water Filter in Plain Terms

The Fleck Radon in Water Filter requires routine attention to maintain its performance. Typically, the system’s media and components are monitored periodically to ensure continued radon removal efficiency. Key maintenance includes checking filters and the media for breakthrough signs and replacing or regenerating media as needed based on water usage and local water quality. The system ships ready to configure, requiring user engagement to maintain the system in proper working order over time but does not need professional servicing to function as intended.

Order of Steps to Rule Out Causes Before Lab Testing

Before pursuing a new radon water test, consider the following order of checks to avoid unnecessary expense:

• Confirm that any existing radon treatment equipment is functioning correctly or has ceased to work, which might cause elevated radon exposure.
• Review any recent changes in well water taste, odor, or staining that might indicate a broader water quality issue.
• Consult local water quality reports or government data for your aquifer, such as the 112SDGV in Saratoga County, to understand typical radon levels.
• Arrange for a certified laboratory radon test on your household water supply to obtain an accurate, site-specific measurement.

How Radon Enters Groundwater in Saratoga County

Radon-222 is a naturally occurring radioactive gas produced by the decay of uranium-bearing minerals found in bedrock. In Saratoga County, radon enters groundwater through natural geologic processes in the 112SDGV aquifer. Water moving through fractures and porous spaces carries dissolved radon gas. Because radon is a gas, it can also be released into the air during water use, such as showering or cooking, potentially contributing to indoor radon levels. Groundwater sampling in the county shows consistent detection of radon, but at levels that have historically remained below federal action guidelines.

What You Should NOT Conclude From Area Radon Data

While government sampling offers useful insight into radon levels in Saratoga County’s 112SDGV aquifer, it does not directly reflect your well water’s radon concentration. Detection in local wells is common but not a violation or health hazard by itself. Without a specific lab analysis of your household water, you cannot assume your water replicates the regional median or range. Area data should guide but not replace individual testing to make well-informed decisions about radon treatment in your home. The Fleck Radon in Water Filter provides a documented method to reduce radon once a problem is confirmed, but its use should follow verification of your water conditions.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2022-08-17. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Radon-222 in the 112SDGV aquifer (Saratoga County): 16 results from 8 wells, median 89.0 pCi/L, range 8.0-500.0 pCi/L; none above any federal threshold