If Your Well Is Similar in Depth to the Sampled Mingo County Wells
The U.S. Geological Survey sampled groundwater in Mingo County's aquifer 327KNWH, collecting four measurements from wells between 35 and 87 feet deep in July 2017. In this depth range, radon-222 was detected in all samples, with values ranging from 19.0 to 530.0 picocuries per liter (pCi/L) and a median of 240.5 pCi/L. These figures reflect the area’s groundwater characteristics but do not represent your specific well's radon concentration. Your water may require independent testing to establish its radon level precisely.
If You Notice Variation in Radon Reports Over Time or Between Wells
The documented samples were collected within a single week in summer 2017, providing a snapshot rather than a long-term average. Seasonal or multi-year shifts in radon presence can occur, influenced by factors such as groundwater flow changes or aquifer conditions. Without ongoing sampling, it’s difficult to predict fluctuations. Interpreting your water quality meaningfully calls for repeated measurements or professional consultation to assess temporal variation.
If You Plan to Seek Advice About Improving Your Water Quality
Before pursuing treatment options, record important details about your water source and current system, including:
- The depth of your well
- The date and results of any water tests, especially for radon
- Information about your existing water treatment equipment’s capacity and limitations
- Descriptions of any water quality issues noticed despite current treatment
Having this information ready enables tailored recommendations for your household’s needs.
If You Observe Persistent Radon-Related Issues at Home
Radon in water is odorless and tasteless, so direct detection through senses is impossible. However, symptoms such as a musty or earthy odor from water, unexpected staining, or scaling in appliances can suggest water quality concerns. Persistent symptoms despite current treatment could point to insufficient radon removal capacity. Keep in mind, other issues may cause similar signs, so laboratory water testing is essential for accurate diagnosis and targeted response.
If You Wonder What the Range of Radon Levels Means in Relation to Federal Guidelines
The federal Environmental Protection Agency (EPA) provides guidelines for radon in water to protect public health, with specific recommended limits for indoor air radon and suggestions for water treatment when levels are elevated. None of the Mingo County aquifer samples exceeded federal action levels, indicating that regionally the water meets these guidelines. However, individual wells can vary substantially, so a measured radon level alone does not confirm safety or risk. Only testing your well water can clarify your household’s situation.
If You Are Managing a Commercial or Industrial Water System Instead of a Household
Commercial and industrial users face more complex water treatment demands, including compliance with additional regulations and the need to protect equipment and processes from radon or other contaminants. These operations require tailored analysis beyond residential parameters, including detailed water chemistry profiling, flow rate considerations, and impact assessments on machinery and health standards.
For households finding their current system cannot keep up with radon removal demands, the Autotrol Radon in Water Filter ships ready to configure as a direct-purchase solution. This technology is designed to reduce radon levels effectively, supporting water safety and quality where elevated radon is a concern.
This page has guided you through how radon measurements from local wells at certain depths inform expectations, the importance of tracking variation over time, critical information to have on hand for treatment discussions, symptom considerations for household water, and the proper interpretation of federal guidelines regarding radon levels. Proper evaluation and testing remain essential to decide when advanced filtration solutions like the Autotrol Radon in Water Filter are appropriate for your home.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2017-07-17. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the 327KNWH aquifer (Mingo County): 4 results from 4 wells, median 240.5 pCi/L, range 19.0-530.0 pCi/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.

