What a Radon Test Report Shows Compared to Regional Data
A laboratory test report for radon in your household water provides a specific measurement of radon-222 concentration from your source. It quantifies the radioactivity in picocuries per liter (pCi/L). However, to understand the context, examining government groundwater sampling data for your area aquifer offers insight into typical radon levels found regionally.
Distinguishing Public-System Records from Private Well Results
The US Geological Survey sampled three separate wells in Craven County's aquifer 124CSLH during September 2013. These results represent area-wide measurements, not your individual well water. Public-system records aggregate such data but do not replace a direct test on your household water, which is necessary to know your specific radon concentration.
Sample Size and the Implications of Limited Data
The dataset includes only three samples from three wells, collected over a short period. While all detected radon-222 in the range of 72.0 to 124.0 pCi/L with a median of 95.0 pCi/L, the small sample size means that the readings describe the aquifer generally but might not capture full variability or extremes possible in other wells.
How Well and Sample Depth Influence Radon Expectations
The wells sampled ranged from 105 to 260 feet deep. Radon levels can vary with depth because radioactivity often originates from underground rock. Deeper wells might show different concentrations than shallower ones. Your water’s radon level depends heavily on the depth and geology of your well, which a direct test will reveal.
Seasonal and Multi-Year Variation in Radon Levels
The sampled data was collected over a brief nine-day period in 2013. While this snapshot indicates radon presence, it does not capture seasonal or annual changes, which radon levels might experience due to groundwater flow and environmental factors. More frequent measurements over time would clarify how stable or variable radon is in your water.
Effect of Plumbing Material and Age on Radon in Household Water
Radon measured at the source water differs from radon in water after it passes through household plumbing. Plumbing materials and the age of pipes do not generate radon but may influence how radon gas escapes into the air or remains dissolved. Understanding these factors helps in assessing radon exposure routes but does not affect radon concentration at the source.
Maintaining Water Radon Reduction Equipment
The Autotrol Radon in Water Filter ships ready to configure for your household. It uses proven technology to reduce radon concentrations in water. Maintaining the system involves routine checks and filter changes per the manufacturer’s guidelines to ensure consistent performance over time without requiring specialized services.
What Craven County Radon Data Does Not Mean for Your Well
While the US Geological Survey’s 2013 data shows radon was detected in all sampled wells at levels below federal thresholds, this does not confirm your well’s radon level. Only testing your household water can establish your actual radon concentration. Regional data provides a useful reference but should not lead to assumptions about your specific water quality or dictate treatment without testing.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2013-09-24. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the 124CSLH aquifer (Craven County): 3 results from 3 wells, median 95.0 pCi/L, range 72.0-124.0 pCi/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.