Autotrol Perchlorate Filter

Buy Now

View full details

Introduction: What Hampton’s Public Water Data Can and Cannot Tell You

Government sampling of the public water system serving Hampton, Rockingham County, conducted by the EPA under the Unregulated Contaminant Monitoring Rule (UCMR1), offers insight into perchlorate presence in groundwater sources. This data describes the water system as a whole, serving approximately 34,000 people, but it does not reveal perchlorate levels in any individual household’s water without separate testing. If you are evaluating treatment options for perchlorate, understanding what the system record shows—and what it does not—helps guide your decisions.

1. What Additional Questions Commercial or Industrial Operators Face Compared to a Household

Unlike residential users, commercial or industrial water users often face higher volume needs and regulatory compliance requirements that demand precise knowledge of water constituent concentrations. They must consider operational impacts, potential product contamination, and discharge regulations. As a household, your focus is primarily on water quality for drinking and daily use, which typically involves managing taste, odor, and potential health considerations with straightforward treatment capacity. This difference shapes the scale and type of treatment you require.

2. Understanding the Measured Range Against Federal Standards—and What It Does Not Indicate

The EPA recorded 18 perchlorate measurements in the Hampton system between 2002 and 2005, all below the reporting level of 4.0 micrograms per liter (µg/L). Currently, no federal Maximum Contaminant Level (MCL) has been set for perchlorate. Therefore, detections below the reporting level do not indicate violations or unsafe water but reflect measured presence or absence within the system. This means the data cannot confirm the perchlorate concentration in your household water and does not imply a health risk by itself.

3. Reading the Record’s Median and Range as a Homeowner Would

Since no perchlorate was detected above the reporting level in Hampton’s public water system record, the median and range for perchlorate measurements are effectively below 4.0 µg/L. For a homeowner, this suggests perchlorate levels have historically been very low or undetectable in the area’s groundwater supply. However, local testing of your well or tap water is needed to determine the exact perchlorate content affecting your household.

4. How Treated Water Differs at the Tap Once Using the Autotrol Perchlorate Filter

The Autotrol Perchlorate Filter is a water treatment system designed to reduce perchlorate in household water. When configured in your home after purchase, it works by filtering out perchlorate ions from the water, improving its quality at the tap. This treatment can provide peace of mind for homeowners who have tested and found perchlorate present in their water supply. The system ships ready to configure with household plumbing and does not require additional service arrangements.

5. What Happens If Perchlorate Is Left Untreated Over Years, Stated Without Exaggeration

Perchlorate can interfere with the thyroid gland’s ability to uptake iodine when present in drinking water over time. Although the EPA found no perchlorate levels above the reporting limit in Hampton’s public water supply, individual wells could vary. Without treatment, sustained exposure to perchlorate at elevated levels (as confirmed by testing in your home) might contribute to altered thyroid function, which is particularly significant for vulnerable populations such as pregnant women and infants. Therefore, knowing your water’s perchlorate content and deciding on treatment is an important step.

6. Why Aesthetic Secondary Standards Differ from Health-Based Limits, Applied to Perchlorate

Perchlorate does not have an established federal secondary standard because it does not cause taste, staining, or odor issues that affect water aesthetics. Secondary standards address these characteristics but do not apply to perchlorate, which is regulated based on health considerations once a federal MCL is decided. This distinction means that even if perchlorate were detected at low levels, it would not impact the water’s appearance or taste, but health-based treatment considerations remain the focus.

In summary, the EPA’s record for the Aquarion Water Company system serving Hampton shows no perchlorate detected above the reporting level in groundwater-sourced public water. This area-wide data helps frame your household’s perchlorate treatment needs but cannot substitute for individual water testing. For detailed information, consult the EPA’s Unregulated Contaminant Monitoring Rule data for system NH1051010, Aquarion Water Co of NH.

Where this information comes from

Source: EPA SDWIS public water system record. Sampled 2002-12-12. These figures describe the public water system's record, not the plumbing inside any individual building.

On record: EPA UCMR1 monitoring (2001-2005) for AQUARION WATER CO OF NH (NH1051010), NH: 18 results across 1 listed contaminants, 0 detections above the reporting level; nothing detected above the method reporting level