Fleck Perchlorate Filter

Buy Now

View full details

How Treated Water Differs at the Tap with the Fleck Perchlorate Filter

Filtered water reduces perchlorate presence as measured at the source

The Fleck Perchlorate Filter is designed to effectively reduce perchlorate levels found in groundwater supplies such as Albany's. While the Albany public water system's records show no perchlorate detected above the reporting level, households choosing this technology can expect water at the tap with lower perchlorate concentrations compared to untreated groundwater where perchlorate is present.

The filter targets perchlorate, a chemical linked to environmental and health monitoring

Perchlorate can come from natural and man-made sources and is known to disrupt thyroid function at sufficient levels. The documented technology reduces perchlorate through ion exchange, providing households control over this constituent in tap water.

Understanding 'Detected,' 'Median,' and 'Range' in Albany’s Sampling Record

'Detected' means perchlorate was measurable above the minimum reporting level

In Albany’s 2001-2005 EPA testing, perchlorate was not detected above the 4.0 microgram per liter reporting level in any sample. This indicates that any perchlorate present was below this measurement threshold, not that it was absent or unsafe.

'Median' and 'Range' values describe the central tendency and spread of measurements

Since no perchlorate measurements exceeded the reporting level, median and range values are not applicable here. These metrics are more informative when detections occur and vary across samples.

Ordering the Steps to Rule Out Perchlorate Concerns at Home

Start with reviewing your local public water system’s latest reports

Albany’s public water system serves over 100,000 people with groundwater sources, and its records include no health-based violations for perchlorate, suggesting low risk at the system level.

Test your own water to confirm household levels of perchlorate

Because public system data represent an aggregate, individual well or tap water testing by a certified laboratory is necessary to know exact household concentrations and determine if treatment is needed.

Consider point-of-use treatment if testing shows perchlorate presence

If perchlorate is detected at levels of concern in your home, the Fleck Perchlorate Filter ships ready to configure to reduce perchlorate effectively.

Information to Record Before Seeking Treatment Guidance

Water source details and any known testing results

Note whether your water comes from private well or municipal supply and gather any existing test reports related to perchlorate or other constituents.

Household size and water usage patterns

Understanding your household demand helps to select appropriate equipment capacity and configuration.

Specific water concerns or aesthetic issues observed

Document any taste, staining, or appliance effects that may relate to water quality to assist in diagnosis and solution planning.

Adjustments for Large Households, Multiple Homes, or Seasonal Residences

Higher demand requires filters sized for increased flow and capacity

Large households need equipment that accommodates greater water volumes without loss of performance regarding perchlorate removal.

Secondary or seasonal homes may not require continuous treatment

For part-time use properties, consider treatment solutions that remain effective during periods of inactivity or can be reactivated easily.

Monitor water quality changes due to different supply conditions

Multiple properties might draw from separate water sources or wells, necessitating individual testing and tailored treatment approaches.

Sample Size and Data Interpretation for Albany's Water System

Data are based on 35 samples from the Albany public water system

This number provides a reasonable overview of perchlorate presence in the system’s groundwater source over the 2001-2005 period.

Zero detections above the reporting level indicate low perchlorate concentrations in system water

The absence of detections above 4.0 micrograms per liter suggests perchlorate has not been a measurable concern within the sampled timeframe.

Sampling covers a broad set of connections serving over 100,000 people

The data represent the overall water quality for the Albany system, but individual household conditions may vary and should be verified through testing.

These findings come from EPA public water system records for Albany in Dougherty County, Georgia, providing an evidence-based snapshot of perchlorate occurrence. For further details, visit the EPA website’s Safe Drinking Water Information System (SDWIS) and Unregulated Contaminant Monitoring Rule (UCMR) data pages.

Where this information comes from

Source: EPA SDWIS public water system record. Sampled 2001-11-14. These figures describe the public water system's record, not the plumbing inside any individual building.

On record: EPA UCMR1 monitoring (2001-2005) for ALBANY (GA0950000), GA: 35 results across 1 listed contaminants, 0 detections above the reporting level; nothing detected above the method reporting level