What Government Sampling Shows for Nitrate in Aquifer 112SRFD
Government groundwater sampling conducted in Franklin County's aquifer 112SRFD shows nitrate was detected in four separate well samples collected between July 16, 2014, and July 20, 2023. The median nitrate concentration was 0.745 milligrams per liter (mg/L), with values ranging from 0.206 to 2.56 mg/L. All measurements were below any federal nitrate threshold, indicating no violations in this regional data set. These results reflect the area aquifer conditions and do not represent any individual household water supply.
Reading a Certified Laboratory Nitrate Test for Your Household Water
A certified lab test for nitrate in your home’s water will provide a concentration reported in mg/L or parts per million (ppm). This number quantifies how much nitrate is dissolved in your water sample. Because nitrate levels can vary widely from one well to another, the only reliable way to know your home's nitrate concentration is to have your water tested directly by a certified laboratory. The presence of nitrate alone is not a violation or an indicator of unsafe conditions; instead, interpretation depends on how your test results compare to regulatory criteria and aesthetic guidelines.
Commercial and Industrial Concerns Differ From Household Considerations
While households focus on health and aesthetic impacts from nitrate, commercial and industrial users often address additional issues such as process water requirements, regulatory reporting, and large-scale water management. These operators ask about consistent nitrate concentrations over time, potential nitrification effects, and compliance with specific industry water quality standards. For household use, the key focus is understanding personal water quality through direct testing and applying appropriate treatment if nitrate levels cause concern.
How the C-Series Nitrate & Nitrite (Well) Filter Addresses Nitrate
To manage nitrate in residential water supplies, the C-Series Nitrate & Nitrite (Well) Filter offers a documented technology designed to reduce nitrate and nitrite concentrations. This system ships ready to configure and uses a specialized media to reduce nitrate levels, improving water quality concerning this constituent. While the system can significantly reduce nitrate, effectiveness depends on the specific nitrate concentration in your household water, which only a certified test can establish.
The Influence of Plumbing Material and Age on Nitrate Levels
Plumbing materials and the age of your household system do not chemically alter nitrate levels in the water itself but can affect water taste, appearance, or interactions with other dissolved substances. Nitrate is a dissolved ion and typically unaffected by piping. However, the presence of certain metals or older plumbing might influence water chemistry differently, underscoring the importance of testing water before and after any treatment device to verify nitrate results and overall water quality.
Differences Between Public Water System Records and Private Well Testing
Public water system records provide monitoring data for water distributed to the general population, usually at multiple points within a supply system. These records report compliance with federal standards and may include nitrate data distinct from private wells. Private well owners cannot assume their water quality matches public system results for the same area or aquifer, as source water and aquifer conditions may vary locally. Only direct testing of a private well water sample reveals the actual nitrate concentration relevant to the household.
In summary, the nitrate data from the US Geological Survey for Franklin County's aquifer 112SRFD shows nitrate detections consistently below federal thresholds in area wells sampled over nearly a decade. This regional data offers a helpful baseline but does not substitute for testing your own household water to understand its specific nitrate levels. For those concerned about nitrate, the C-Series Nitrate & Nitrite (Well) Filter provides a proven option to reduce nitrate once its presence in your water is confirmed by laboratory analysis. For more detailed groundwater data, visit the official USGS site for aquifer 112SRFD.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2023-07-20. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Nitrate in the 112SRFD aquifer (Franklin County): 4 results from 1 wells, median 0.745 mg/L, range 0.206-2.56 mg/L; none above any federal threshold