Autotrol Nitrate & Nitrite (Well) Filter

Buy Now

View full details

1. Commercial or Industrial Questions Go Beyond Residential Concerns

Commercial and industrial water users often consider nitrate differently because of regulatory and usage volume factors. While households mainly focus on health and taste effects, commercial operations might assess nitrate impact on processes and discharge permits. Residential households typically do not need to address operational or compliance questions that larger scale users face.

2. How the Autotrol System Removes Nitrate and Nitrite from Your Water

Nitrate and nitrite are water contaminants commonly arising from fertilizer runoff and septic systems. The Autotrol Nitrate & Nitrite (Well) Filter uses a filtration process designed to reduce these compounds from water sourced from wells or aquifers like 112DFSF. This system treats water by exchanging ions or using specialized media to lower nitrate levels before water reaches your household taps.

3. Changes at the Tap After Using the Autotrol System

Once the Autotrol System filter is configured to your water source, you may notice water free from elevated nitrate taste and less staining associated with excess nitrate presence. While nitrate itself is tasteless at typical concentrations, reducing it can improve water quality perception. The treated water remains clear with no added chemicals, providing peace of mind about nitrate-related health considerations.

4. What ‘Detected,’ ‘Median,’ and ‘Range’ Mean in the Nitrate Sampling Data

Government sampling recorded 398 nitrate measurements across 20 wells in CT’s FIPS 180, aquifer 112DFSF area from 2010 to 2025. ‘Detected’ means nitrate was measured in every sample, never below reporting limits. The median level was 6.23 mg/L, showing half the measurements were above and half below this number. The range spanned from 0.456 to 112.0 mg/L, indicating variability between wells and dates. Notably, 149 results exceeded the federal maximum contaminant level (MCL) of 10.0 mg/L, a health-based threshold set to protect vulnerable groups like infants.

5. Influence of Well Depth and Source Type on Expected Nitrate Levels

Wells sampled ranged between 10 and 80 feet deep, which can influence nitrate presence. Shallow wells can be more susceptible to surface contamination sources such as agriculture or septic systems, potentially showing higher nitrate variation. Deeper wells might have lower nitrate, but this varies by local geology and land use. Household water drawn from similar depths should consider testing their specific water for accurate nitrate levels.

6. Household Symptoms That May Indicate or Exclude Nitrate Issues

Symptoms traditionally linked to nitrate problems include a bluish coloration in infants (methemoglobinemia risk) but such effects are rare and require high nitrate exposure. Nitrate presence itself often does not cause taste, odor, or staining. If your household water is clear and has no unusual taste, nitrate may still be detected by testing but not noticeable. Other water issues like hardness or iron staining do not signal nitrate occurrence.

In summary, regional nitrate data for CT’s FIPS 180 aquifer 112DFSF show varied nitrate levels, with many samples exceeding the federal MCL. Understanding these results clarifies why testing your own household water is essential. Where nitrate is elevated, the Autotrol Nitrate & Nitrite (Well) Filter offers an effective treatment option, providing safer water at your tap.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2025-11-21. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Nitrate in the 112DFSF aquifer (FIPS 180): 398 results from 20 wells, median 6.23 mg/L, range 0.456-112.0 mg/L; 149 above a health-based federal MCL (federal MCL 10.0 mg/L)