If Your Water Test Report Shows Iron and Hardness Concentrations
A laboratory report for iron and hardness typically lists concentrations in mg/L or grains per gallon, indicating the amount of dissolved minerals such as calcium and magnesium. For households in Johnson County drawing from aquifer 111ALVM, understanding these numbers is key to selecting the right treatment system.
If You Are a Residential User Comparing Needs to Commercial or Industrial Settings
Commercial and industrial water users often consider higher volume demands and more complex water interactions than households. They may test a broader range of parameters and have more stringent operational requirements. For a typical residential setting, water treatment choices focus on improving water quality for daily use and protecting plumbing and appliances from mineral buildup.
If You Wonder What Secondary Standards Mean for Your Water
Federal guidelines include secondary standards that address aesthetic concerns such as taste, staining, and corrosiveness rather than health risks. In Johnson County's aquifer 111ALVM, government groundwater sampling found hardness levels ranging from 300.0 to 548.0 mg/L with a median of 337.0 mg/L. Although these values are above common secondary aesthetic thresholds, no federal limits were exceeded, meaning the water is not considered unsafe by health standards. However, such hardness can affect water use comfort and fixtures.
If You Want to Interpret the Government Sampling Data for Your Household Water
The data from four separate wells, sampled between 2011 and 2017 at depths ranging from 17 to 177 feet, represent area conditions but not your individual well. The sampling results reveal consistent detection of hardness at levels that might cause scaling and staining issues within households. Understanding your own water’s exact levels requires specific testing of your well or supply.
If You Need to Distinguish Iron and Hardness from Other Water Quality Concerns
Hardness primarily refers to calcium and magnesium content, often causing scaling, while iron causes discoloration and metallic taste. These two constituents can co-occur but require different attention than contaminants like manganese or sediment, which are separate water quality problems. Proper testing helps identify which issues are present so treatment addresses the actual conditions.
Choosing a System to Match Your Measured Demand
For households facing iron and hardness in Johnson County water from aquifer 111ALVM, treatment solutions must be sized according to the amount of hardness and iron in your specific water supply. The Fleck Iron + Hard Water (Well) System offers a 32,000 grain capacity, effectively reducing both iron and hardness when selected to match your water quality. This system ships ready to configure for connection with your water supply, providing a practical step toward improved water quality.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2017-08-28. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 111ALVM aquifer (Johnson County): 5 results from 4 wells, median 337.0 mg/L, range 300.0-548.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.