Autotrol Faded, Stiff Laundry System

Buy Now

View full details

1. Considering Well and Source Depths When Assessing Laundry Water

Laboratory reports from groundwater in CT’s aquifer 112DFSF, sampled at depths between 21 and 29 feet, show mineral concentrations that can influence laundry outcomes. The samples collected between 2011 and 2017 indicate a median calcium and magnesium content of 27.5 mg/L with a range from 19.7 to 29.4 mg/L. These minerals, though detected, remain below any federal thresholds and are not themselves health concerns.

However, the depth and type of water source a household uses can affect mineral presence and behavior, influencing fabric quality during laundering. Shallower wells or surface water sources may show different profiles. Knowing your own water source depth helps set expectations about mineral impacts on laundry.

2. Plumbing Materials and Age: Independent Factors in Laundry Fading

Besides source water composition, the materials and age of plumbing in a home affect how minerals interact with fabrics over repeated washes. Older pipes or certain metals can contribute to mineral deposits or changes in water chemistry as water travels to the washing machine. These factors are separate from the mineral content measured at the source but can impact overall water quality experienced during laundering.

3. Matching Treatment Capacity to Household Laundry Needs

When considering treatment options to address faded laundry, it’s important to assess daily water demand. The capacity of any system chosen should align with the volume of water used for laundry to ensure consistent results. Households with larger laundry loads or frequent washing cycles will require equipment that can handle higher throughput without performance loss.

4. The Order to Exclude Other Causes of Laundry Fading

Before investing in a water treatment system, it’s practical to rule out non-water-related causes of fabric fading. Start with examining detergent types, water temperature settings, and washing machine maintenance. Next, check for plumbing or fixture issues that may influence water quality. After these steps, a certified laboratory test of your household water can identify specific mineral concentrations affecting laundry.

5. Interpreting Local Mineral Data as a Homeowner

Using the median and range of mineral concentrations found in CT’s aquifer 112DFSF, homeowners can understand typical conditions impacting laundry. The median value of 27.5 mg/L calcium and magnesium suggests moderate mineral presence that may contribute to fabric stiffness or fading over time. The range indicates some variability between different wells sampled. This data does not predict any single home’s water quality but provides a regional baseline.

For targeted treatment, the Autotrol Faded, Stiff Laundry System ships ready to configure and is designed to address issues linked to these minerals effectively, supporting better fabric care.

Closing

The groundwater sample data referenced applies to wells within CT's aquifer 112DFSF and does not reflect individual household water directly. For detailed information, see the original U.S. Geological Survey source at https://waterdata.usgs.gov/monitoring-location/413427072355501/. This regional insight aids in making informed decisions about laundry water treatment and fabric care solutions.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2017-05-10. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 112DFSF aquifer (FIPS 130): 3 results from 2 wells, median 27.5 mg/L, range 19.7-29.4 mg/L; none above any federal threshold