Fleck Corrosive Water Damaging Pipes Filter

Buy Now

View full details

Corrosive Water Is Not Solely Determined by Source Water Chemistry in Lake County

Households in Lake County considering treatment for corrosive water should note that the chemistry of the local aquifer 110DUNED, as measured by U.S. Geological Survey groundwater samples, provides useful background data but does not define an individual home’s water condition. While chloride—a known contributor to corrosion—was detected in every sample taken from nine wells in the area, these concentrations vary widely and reflect regional characteristics rather than a specific well or household supply. Corrosion potential in plumbing systems also depends heavily on the materials and age of those plumbing components, which interact with water chemistry to influence corrosion risk.

Seasonal and Multi-Year Changes Are Evident in Lake County’s Groundwater Sampling

The U.S. Geological Survey collected chloride data from September 2014 through March 2021, offering a window into how water quality shifts over time in aquifer 110DUNED. This sampling window shows median chloride levels around 98.1 mg/L but a range from 8.45 to 578.0 mg/L across multiple wells and dates. Such variation implies that a home’s water chemistry can fluctuate seasonally or across years, affecting corrosion potential differently at different times. Treatment decisions should therefore consider that water quality is not static and that a one-time test complements but does not replace understanding these trends.

Well Depth and Source Type Influence Water Chemistry That Affects Corrosion

The Lake County wells sampled were between 16 and 30 feet deep, shallow enough to be influenced by surface and geologic conditions typical of aquifer 110DUNED. This depth range can differ significantly from other wells in the area or municipal systems drawing from deeper or alternate sources. Corrosion risk factors such as chloride concentration and total dissolved solids tend to vary by depth and source type, so understanding the depth of your own water source helps frame potential corrosivity and informs the type of treatment needed.

Corrosive Water Differs from Other Water Concerns Like Hardness or Sediment

It is important to distinguish corrosive water from other common water issues. Chloride detected in Lake County wells is primarily an aesthetic concern at higher levels, affecting taste or causing staining but not a health hazard or violation. Hardness, sediment, or biological contaminants are separate issues not addressed by chloride levels or corrosivity alone. Treatment aimed at corrosion focuses on preventing damage to pipes and fixtures rather than addressing mineral scale or sediment buildup.

Public Records Provide Area-Wide Data; Only a Certified Test Confirms Household Corrosivity

Lake County’s public groundwater records offer comprehensive regional data collected over years from multiple wells. However, these data cannot substitute for a test of your household’s water supply. Because corrosivity depends on local plumbing materials, water chemistry specific to your well or tap, and temporal variations, a certified water analysis measuring corrosion-related parameters is the definitive step. Such a test confirms whether corrosive conditions exist in your home water system and guides whether equipment like the Fleck Corrosive Water Damaging Pipes Filter is appropriate.

Next Step: Obtain a Certified Corrosion Test to Decide Treatment

To determine the correct class of treatment for corrosive water in your Lake County home, order a certified water test that measures corrosion indicators such as pH, chloride, and total dissolved solids specific to your water source. If results indicate corrosive water conditions, the Fleck Corrosive Water Damaging Pipes Filter, which ships ready to configure for residential use, can address these concerns effectively by conditioning water to protect plumbing. This targeted approach ensures your treatment matches your actual household water quality rather than relying solely on regional data.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2021-03-11. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Chloride in the 110DUNED aquifer (Lake County): 71 results from 9 wells, median 98.1 mg/L, range 8.45-578.0 mg/L; 13 above an AESTHETIC secondary standard only (secondary standard 250.0 mg/L (aesthetic)) - not a health finding