1. How Treated Water Will Differ at Your Tap
When you use a Fleck Complete Well System, your treated water typically shows reduced total dissolved solids (TDS), the measure of mineral content that affects taste and plumbing deposits. This system processes your entire household water supply, helping to manage mineral levels that the region’s wells may carry, leading to clearer, better-tasting water with less buildup in pipes and appliances.
2. What Information to Collect Before Pursuing Treatment Advice
Before choosing treatment, write down the results of any recent water test reports for your well, including TDS levels and any other mineral or constituent measurements. Note the depth of your well, the volume of daily water use in your household, and any visible signs of water quality issues, such as taste or staining. These details will clarify your needs and help match treatment capacity accordingly.
3. Understanding Certified Laboratory Reporting on Total Dissolved Solids
A certified lab report will present TDS as a concentration in milligrams per liter (mg/L). It shows a numeric value determined by standardized testing, reflecting the combined amount of dissolved minerals in your water. The U.S. Geological Survey’s sampling in Warren County’s aquifer 112SFDF found TDS levels ranging widely from 0.04 to 419 mg/L across six wells but with a median value of 118 mg/L. Importantly, none of these samples exceeded federal thresholds, which means the detected levels are within ranges typically considered normal for groundwater here.
4. Influence of Sample and Well Depth on Expected Water Characteristics
Samples taken from depths between 12 and 160 feet in this aquifer show variability in mineral content; deeper or shallower wells can produce different TDS levels due to strata and local geology. Your well depth plays a key role in setting expectations for water quality and selecting a treatment system sized to the minerals your water is likely to contain, ensuring the system’s capacity aligns with your water’s specific profile.
5. Reading Regional Data: Median and Range as a Homeowner
The median TDS value of 118 mg/L in Warren County’s sampled wells indicates a typical mineral content found in the water from this aquifer. The range from very low (0.04 mg/L) to moderately higher concentrations (419 mg/L) shows there can be significant variation even nearby. This highlights the importance of testing your specific well since local variations can be substantial despite regional averages, helping you avoid over- or under-treating your water.
For managing these mineral levels consistently, the Fleck Complete Well System provides a grain capacity of 32,000, making it suitable for typical household volumes and the concentrations documented in your area. The system ships ready to configure, designed to address the range of dissolved solids commonly present in wells like those of Warren County’s 112SFDF aquifer.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2025-06-16. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Total dissolved solids in the 112SFDF aquifer (Warren County): 84 results from 6 wells, median 118.0 mg/L, range 0.04-419.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.