Iron Levels in Broward County’s Aquifer 112BSCNN
Government sampling by the U.S. Geological Survey has tested groundwater from 42 wells in Broward County, specifically in aquifer 112BSCNN, over a decade with 62 results reported between 2010 and 2020. Iron was detected in nearly all samples, with concentrations ranging from 3.5 to 4600 micrograms per liter (ug/L). The median iron concentration was 502 ug/L. These wells were sampled at depths ranging from 10 to 152 feet.
Importantly, none of these measurements exceeded any federal thresholds. This means while iron is regularly present in the county’s aquifer water, the concentrations found are within regulatory guidelines for safety. However, the presence of iron may still cause issues in residential water such as staining, discoloration, and taste effects, especially when combined with hard water.
What Hard Water Means for Broward County Homes
Hard water contains high levels of calcium and magnesium minerals, which can lead to buildup inside pipes, fixtures, and appliances. When hard water also carries iron—as is common in Broward County based on local aquifer data—household water quality concerns may intensify. Residents often notice reddish or rusty stains on sinks and laundry, metallic taste, and increased maintenance needs for plumbing and appliances.
Why Testing Your Specific Water Matters
While the U.S. Geological Survey provides valuable regional water quality information, individual well or municipal water testing is necessary to determine your home's exact iron and hardness levels. This testing enables proper sizing and capacity planning for treatment solutions, ensuring they accommodate your water conditions accurately.
Addressing Iron and Hard Water with Capacity in Mind
When sizing a treatment system for iron and hard water, it’s important to consider the treatment capacity relative to your household’s water usage and the iron concentrations typical of your area. Systems that are undersized may require more frequent maintenance or struggle to handle peak demand, while oversized units may increase upfront costs unnecessarily.
The WSP Whole House Iron & Sulfur Filter - City Water, Hard uses air injection technology specifically designed to manage iron and sulfur in hard water environments. This filter has a grain capacity of 64,000, reflecting its ability to handle significant iron content and water hardness without premature exhaustion.
Configured for whole-house use, this filter ships ready to set up and can be adapted to many household water systems. Its air injection process oxidizes dissolved iron, converting it into particulate form that the filter media can then capture effectively, helping reduce staining and taste issues associated with iron in water.
Next Steps in System Configuration
To ensure accurate sizing and optimal performance, start with precise water testing that quantifies iron concentration and hardness levels specific to your household water supply. Armed with these data, you can select a treatment system that balances capacity and efficiency for your daily water use demands.
In summary, Broward County’s aquifer sampling shows a consistent presence of iron within regulatory safety limits but at levels that may impact water aesthetics and equipment lifespan when combined with hard water. Using a high-capacity air injection iron filter designed for hard water conditions provides a practical approach to resolving these challenges in residential water systems.
Where this information comes from
Source: USGS groundwater sampling. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
The documented solution
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.