Pentair Arsenic Filter

Buy Now

View full details

Reading Fort Bend County’s Arsenic Measurements as a Homeowner

Water in Fort Bend County primarily comes from the deep aquifer 112CHCT, where groundwater is drawn through wells hundreds of feet deep. According to the U.S. Geological Survey’s sampling across six wells between 2010 and 2015, arsenic was detected consistently in all 10 samples. The concentrations ranged from 0.37 to 3.5 micrograms per liter (ug/L), with a median value of 2.4 ug/L. These numbers represent general conditions in the area, not the arsenic level in any individual well or tap.

Key Information to Gather Before Selecting Residential Treatment Equipment

Before choosing a treatment solution, homeowners should determine their own water’s arsenic concentration through certified laboratory testing. Essential details to note include:

• Exact arsenic concentration in micrograms per liter (ug/L) from your water test report
• Depth and type of your water source well
• Usage patterns and water volume demands of your household
• Presence of other water constituents that may influence treatment choice

Having precise information about your water enables better matching of treatment equipment to your needs.

What Fort Bend County’s Arsenic Range Indicates Compared to Federal Standards

The federal maximum contaminant level (MCL) for arsenic in drinking water is 10 ug/L. The sampled wells in Fort Bend County’s aquifer 112CHCT show arsenic concentrations below this federal safety threshold. This means the recorded concentrations do not indicate a regulatory violation or health-based exceedance. However, arsenic presence, even below the limit, may still prompt homeowners to consider treatment, especially for long-term exposure concerns or aesthetic preferences.

How the Pentair Arsenic Filter Addresses Arsenic in Household Water

The Pentair Arsenic Filter is designed to reduce arsenic from residential water supplies through processes verified for arsenic removal. It treats water post-collection, lowering arsenic levels to support safer household use. The system ships ready to configure and is suited for ongoing operation with routine maintenance. Using specialized filtration media, it targets arsenic removal effectively while preserving water flow and quality.

Potential Consequences of Not Addressing Arsenic in Household Water Over Time

Long-term ingestion of arsenic, even at low concentrations, has been linked to various health concerns by scientific studies. While the levels detected in Fort Bend County’s sampled aquifer fall below federal limits, homeowners may choose to manage arsenic to reduce potential cumulative effects. Without treatment, arsenic remains present in water used for drinking, cooking, and bathing.

Seasonal and Multi-Year Variability in Arsenic Measurements for Aquifer 112CHCT

The USGS data spans nearly five years, from October 2010 to July 2015, showing consistent detection of arsenic within a fairly narrow range. This suggests that arsenic concentrations in the aquifer are relatively stable over this period, with no significant seasonal spikes identified in the sampled wells. Depths of wells varied from 336 to 1220 feet, yet arsenic remained detectable across them all.

To confidently determine your household water’s arsenic status, order a comprehensive water test analyzing arsenic concentration. A result showing arsenic below regulated limits can reassure you or guide you toward treatment. This test is the definitive step in deciding whether equipment like the Pentair Arsenic Filter meets your residential water needs.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2015-07-07. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Arsenic in the 112CHCT aquifer (Fort Bend County): 10 results from 6 wells, median 2.4 ug/L, range 0.37-3.5 ug/L; none above any federal threshold