Pentair Acidic / Low-pH Water Filter

Buy Now

View full details

Step 1: Consider How Sample Depth and Well Depth Affect Acidic Water Expectations

The U.S. Geological Survey sampled groundwater from 8 wells in Burt County’s aquifer 110SAGR at depths ranging from 59 to 245 feet. These samples found pH values consistently within 6.5 to 7.3 standard units, all within the EPA’s secondary range of 6.5 to 8.5. This indicates that, at these depths, the water tends to be neutral to mildly acidic but not below the aesthetic threshold. Your own well’s depth and source type might differ, so area data offers guidance but does not reveal your exact condition.

Step 2: Understand How pH Levels Arise in Burt County’s Groundwater

Acidic water in this region results from natural geochemical interactions within the aquifer. The slightly acidic range seen in the sampled wells likely reflects organic material breakdown and natural minerals dissolving into the water. These processes influence pH but do not represent contamination or health risk. Knowing this helps households interpret what acidic water means locally versus in other areas.

Step 3: Compare Burt County’s pH Range to Neighboring Areas Without Overreading Differences

Neighboring counties may show different groundwater pH ranges due to variations in geology and aquifer composition. Burt County’s consistent pH readings near neutral contrast with regions where more acidic or alkaline water is detected. However, these distinctions reflect broad aquifer characteristics and should not be applied directly to individual wells without testing. Regional data sets a baseline for expectations but not for certainty.

Step 4: Note Additional Considerations for Commercial or Industrial Water Users

While this page focuses on residential households, commercial or industrial users may face stricter demands related to water pH, such as process compatibility or regulatory drivers. These users should evaluate how mild acidity could interact with equipment or production needs beyond household concerns. For typical homes, the mild acidity found in Burt County groundwater usually poses aesthetic or material considerations rather than operational constraints.

Step 5: Identify Household Symptoms That May Signal Acidic Water and Those That Do Not

Corrosive water can cause metallic taste, stained plumbing fixtures, or accelerated wear on pipes and appliances. However, Burt County’s aquifer data shows pH levels that are not strongly acidic, making severe corrosion symptoms less likely solely due to pH. Other causes can mimic acidic water effects, so careful observation is important before deciding on treatment. Low pH alone does not guarantee these problems.

Next Step: Order a pH Test for Your Specific Household Water Supply

To confirm whether acidic water is present in your home, arrange for a pH measurement of your own water from the tap or well. This test will provide the definitive data needed to assess your water’s condition. If the pH is below the EPA’s secondary range, a Pentair Acidic / Low-pH Water Filter ships ready to configure as a targeted solution to adjust acidity and protect plumbing and fixtures.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2014-08-06. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of pH in the 110SAGR aquifer (Burt County): 32 results from 8 wells, median 7.1 standard units, range 6.5-7.3 standard units; EPA secondary standard for pH is 6.5-8.5 (aesthetic/corrosivity, not health-based); 0 of 32 sampled results fell below 6.5