WSP 7 GPM Booster Pump - Cent

If your building’s water pressure or flow isn’t enough to run your treatment equipment properly, the WSP 7 GPM Booster Pump can help. Designed to supply steady pressure up to 7 gallons per minute, it supports systems like reverse osmosis membranes that need consistent feed pressure to work well.

The problem you’re facing

You turn on a water treatment system or appliance, and the pressure just isn’t there. Maybe your treatment equipment runs sluggishly or shuts down because it can’t draw enough water. Low water flow or pressure can make your filters, softeners, or reverse osmosis units struggle or fail to perform as they should. You might notice sluggish faucets, slow refills, or equipment alarms triggered by insufficient pressure.

Why the pressure is too low

Water treatment equipment often needs a minimum pressure to operate correctly. This is especially true for reverse osmosis (RO) membranes, which rely on steady, higher pressure to push water through the fine filters inside. If your incoming water pressure drops below what your system needs, or your pipe runs are long and reduce flow, your equipment won’t get enough water to treat. Confirm it with a simple pressure gauge test on the feed line just before your treatment system.

What low pressure costs you

When your treatment equipment doesn’t get enough water pressure, it can become inefficient or stop working altogether. RO systems produce less purified water, and filters may clog faster or fail to clean properly. This means your treated water supply shrinks, and the system’s lifespan can shorten due to strain. You might end up spending more time troubleshooting or paying for repairs and replacement parts sooner than expected.

How the WSP 7 GPM Booster Pump helps

This pump raises the water pressure feeding your treatment system by gently pushing water through with a multi-stage centrifugal design. That means it uses several impellers—imagine small wheels inside the pump—to build pressure step by step without wasting energy. The consistent flow it provides helps your RO membranes or other treatment equipment get the steady pressure they need to operate smoothly.

What this pump can handle

With a flow capacity of 7 gallons per minute, this booster pump fits smaller commercial or compact residential RO systems and other light-duty boosting needs. Its stainless steel body resists corrosion, so it holds up well even when handling treated water or water that might be slightly aggressive. While it’s not for heavy industrial use or very high-volume systems, it efficiently supports mid-sized setups that require reliable, steady pressure without oversizing or energy waste.

What you actually get

The pump itself features a 3/4 horsepower motor and corrosion-resistant stainless steel construction. It’s a multi-stage centrifugal pump designed to provide reliable, consistent pressure and flow at the rated 7 GPM. The exact installation details and configuration depend on your system and will be confirmed when you size the pump for your water.

Is this the right size for you?

If your treatment system or building needs water pressure boosted up to about 7 gallons per minute, this pump is likely a good match. For smaller flows, a less powerful booster might be more efficient. For larger commercial systems needing higher flow or pressure, you should consider a bigger pump. Matching the pump to your system’s demands ensures efficiency and longevity.

Living with this pump

Booster pumps like this require straightforward maintenance. Periodic checks for leaks, electrical connections, and any unusual noises help keep it running. The stainless steel construction reduces corrosion concerns, but filters upstream need to be maintained to protect the pump from sediment or chlorine that could cause wear. Overall, upkeep is moderate and manageable with routine plumbing service.

What it won’t do

This pump does not treat water or remove contaminants—it only raises water pressure. If your water has sediment, chlorine, or other problems, you’ll still need proper pretreatment. It also won’t address very high-volume needs beyond its 7 GPM capacity or replace the need for your treatment system’s other maintenance and care.

Why buy this from Water Softener Plus?

You get a durable, serviceable stainless steel booster pump with parts available for years to come. It ships free from our Tampa location, with no hidden fees. We provide straightforward sizing help from experienced people who understand real water problems, not just specs. Plus, there’s a 90-day money-back guarantee, so you can order with confidence.

Specifications

The next step

Order the WSP 7 GPM Booster Pump online now to ensure your water treatment system gets the pressure and flow it needs. Free U.S. shipping is included, and expert sizing advice is just a call or message away.