Fleck Well Rust + Hardness System

$1,589.23

Buy Now

View full details

If your water hardness falls within the observed range in Lake County, what does that signify?

The U.S. Geological Survey collected 22 hardness measurements in 18 separate wells across Lake County's aquifer 110QRNR from 2011 to 2021. These results showed a median hardness of 268.5 mg/L, with values ranging from 133.0 to 417.0 mg/L. All samples detected hardness due to calcium and magnesium, but none were above federal thresholds. This indicates that while hardness is present at measurable levels regionally, these concentrations are not considered a violation or unsafe by federal standards. However, hardness at these levels can contribute to rust problems and affect household plumbing and appliances through scaling or staining if left untreated.

If you have a large household, second home, or seasonal property in Lake County, how does this affect your approach?

Larger or multiple-use households often put higher demand on water treatment equipment, which may struggle to keep up with the hardness and rust potential in your water. The documented hardness range from local sampling suggests that equipment sized for average usage may require upgrading to manage increased volume or intermittent use patterns seen in seasonal homes. The Fleck Well Rust + Hardness System, with a 32,000 grain capacity, provides enough treatment power to accommodate increased water needs without premature exhaustion. Households facing these conditions should consider the equipment capacity carefully to maintain effective rust and hardness control.

If you want to reduce hardness and rust effects, how does the Fleck Well Rust + Hardness System work?

This treatment system is designed specifically to address calcium and magnesium hardness that contributes to rust-related water quality issues. It uses ion exchange technology to remove hardness ions from your water, preventing scale buildup and rust staining in pipes and fixtures. The system ships ready to configure, delivering an established capacity that matches typical residential needs in Lake County. It does not remove rust particles directly but controls hardness levels that can exacerbate rust appearance and damage. Using this system helps protect household plumbing and appliances by reducing the mineral content that causes troublesome deposits.

If rust and hardness impacts appear in certain fixtures or appliances, which are affected first and why?

Fixtures and appliances relying on heated water or with narrow passages usually show symptoms first. Water heaters, dishwashers, and washing machines can develop scale deposits faster, reducing efficiency and lifespan. Bathroom fixtures like faucets and showerheads often show rust staining or mineral buildup, impacting aesthetics and function. Because calcium and magnesium hardness compounds precipitate under heat and flow conditions, these locations are the initial points of impact. Addressing hardness decreases maintenance needs and improves performance in these common household areas.

If you operate a commercial or industrial property instead of a household, what additional considerations apply?

Commercial or industrial users must evaluate larger capacity demands and possible regulatory compliance related to water treatments beyond residential standards. They may require systems with higher grain capacities, consistent maintenance schedules, and monitoring to handle process-specific water quality needs. Unlike households, industrial operations often face more stringent water quality performance criteria and potential for greater equipment wear from hardness. While the Fleck Well Rust + Hardness System suits residential settings, commercial operators typically assess multiple factors including volume, flow rates, and process sensitivity in their water treatment decisions.

If you wonder how reliable the government data is about hardness in your area, what should you know?

The hardness figures come from 22 samples taken from 18 wells in Lake County’s aquifer 110QRNR, sampled between 2011 and 2021 at depths of 8 to 18 feet. This provides a moderate sample size reflecting regional groundwater conditions but does not represent any individual well’s current water quality. A small number of wells and relatively shallow depths means some local variability is possible. The data indicates general hardness trends rather than precise personal water composition. Therefore, it is important to perform well-specific testing to confirm your water’s actual hardness and rust potential.

The single test you should order is a comprehensive hardness test of your own well water. A result showing calcium plus magnesium hardness near or above the area’s median of 268.5 mg/L indicates ongoing rust and hardness challenges that the Fleck Well Rust + Hardness System can effectively address.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2021-06-22. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 110QRNR aquifer (Lake County): 22 results from 18 wells, median 268.5 mg/L, range 133.0-417.0 mg/L; none above any federal threshold