Fleck VOCs & Industrial Chemicals Filter

$949.00

Buy Now

View full details

What a Laboratory's Method Detection Limit Means When a Compound Is 'Not Detected'

If you wonder why test reports sometimes say a VOC was "not detected," it means the laboratory instrument did not find the compound above its method detection level. For Gulfport's public water system, this threshold varies by compound—for instance, 0.03 micrograms per liter (µg/L) for 1,1-dichloroethane and 0.2 µg/L for chloromethane and bromomethane. "Not detected" does not imply the compound is completely absent, only that it is below this sensitivity level.

The EPA's monitoring data from 2013 to 2015 shows that several VOCs, including 1,1-dichloroethane, chloromethane, bromomethane, HCFC-22, 1,3-butadiene, and MTBE, were not found above detection levels in this system. For halon 1011, one detection was recorded above its detection limit of 0.06 µg/L, with a highest concentration of 0.468 µg/L. However, there are no federal maximum contaminant levels (MCLs) for these specific volatile compounds.

How the Documented Treatment Technology Removes or Neutralizes the Constituent

Volatile organic compounds like those monitored in Gulfport can sometimes affect water taste or odor. The Fleck VOCs & Industrial Chemicals Filter is a water treatment system designed to remove various VOCs and industrial chemical contaminants from residential water supplies. It typically uses carbon-based filtration media that adsorb volatile organics, reducing their presence in water you use daily.

This system ships ready to configure for household use and targets a broad range of solvent compounds. While it does not provide numeric removal guarantees here, its technology is documented to reduce VOC concentrations to levels below those measurable by standard EPA detection limits.

Which Fixtures, Appliances or Processes Are Affected First and Why

Volatile organics can enter water used throughout the home, but their effects are often first noticed during activities that release water vapor or aerosols. Showering, cooking, and dishwashing can cause VOCs to volatilize into air, potentially increasing inhalation exposure. Water outlets like showerheads and kitchen faucets may thus be focal points for treatment impact.

Water used for drinking and cooking is also directly relevant, emphasizing the importance of treating water at the point it enters the home or just before consumption. Some appliances like humidifiers or ice makers can concentrate any volatile compounds present, making treatment beneficial before water reaches these devices.

How Many Samples and Wells Stand Behind the Figures, and What a Small Sample Means

The EPA data for Gulfport’s water system is based on 18 to 26 samples per VOC, collected from public groundwater sources serving over 31,800 connections and 75,000 residents. Although this sample size provides a snapshot of water quality trends, it does not guarantee the absence of VOCs in any specific household supply.

The relatively small sample count means that detections reflect system-wide conditions rather than individual well or tap water. Private wells or household plumbing may have different VOC levels, which only personal water testing can determine.

How Seasonal Water-Table Changes Move a Solvent Plume Relative to a Well Screen

Groundwater sources in Gulfport experience seasonal variations in water tables that can shift contaminant plumes horizontally and vertically. A solvent plume containing VOCs may move closer to or farther from the well screen depending on rainfall, recharge, and pumping rates.

This natural fluctuation affects detected VOC levels in public water supplies over time. Monitoring programs periodically sample to capture these changes, but individual residences might see variations not reflected in system-wide data, underscoring the value of ongoing water quality assessments.

How to Judge Treatment Capacity Against the Household's or Facility's Daily Demand

Selecting a water treatment system like the Fleck VOCs & Industrial Chemicals Filter involves understanding your household's average daily water use. The system’s capacity to adsorb and remove VOCs depends on flow rates and contact time with filtration media.

Homes with higher water use or those seeking to remove VOCs from all points of use should consider treatment options sized accordingly to maintain performance. The Fleck system ships ready to configure for residential capacity needs, ensuring it can accommodate typical daily demands while effectively reducing VOC levels.

In summary, EPA sampling from 2013 to 2015 for the City of Gulfport (MS0240003) public groundwater system shows detected VOCs at or below laboratory detection limits with no federal maximum contaminant level exceedances. These figures represent system-wide measurements, not specific private water supplies, and are available through EPA public records for further review.

Where this information comes from

Source: EPA SDWIS public water system record. Sampled 2014-02-03. These figures describe the public water system's record, not the plumbing inside any individual building.

On record: EPA UCMR3 monitoring (2013-2015) for City of Gulfport (MS0240003), MS: 134 results across 7 listed contaminants, 1 detections above the reporting level; no federal MCL for these UCMR-listed VOCs