Fixtures and Processes Sensitive to Uranium-Radium
Hot Water Systems Show Effects First
Water heaters and boilers tend to concentrate dissolved solids, including uranium and radium, because heating can reduce water volume and alter chemistry. This may increase potential staining or buildup related to these minerals.
Kitchen and Bathroom Faucets
Tap water at these points is the primary exposure source for drinking and cooking, making them critical for assessing uranium-radium concerns.
Ice Makers and Coffee Machines
These appliances use and sometimes concentrate water in small volumes, potentially highlighting water quality issues.
Notes to Record Before Seeking Treatment Guidance
Current Water Source and Depth
Note if you use well water, municipal supply, or a combination, and the depth of any household wells. Regional samples indicate wells from 25 to 215 feet deep were measured.
Previous Water Quality Test Data
Gather any past laboratory results specific to uranium or radium to understand your water's baseline.
Household Usage Patterns
Record the number of occupants and any special household water uses that may affect demand or exposure.
Understanding a Certified Laboratory Test Report
Concentration Units and Detection Limits
Lab results for uranium and radium are often reported in micrograms per liter (ug/L). The U.S. Geological Survey reported median uranium levels of 1.8 ug/L in the regional aquifer, with some samples ranging up to 17.6 ug/L.
Reporting Limits Versus Detection
A result below the reporting limit means the constituent was not measurable, but detection above this limit does not itself imply a health issue.
Comparing Results to Federal Thresholds
No samples in El Paso County aquifer 111ALVM exceeded federal uranium limits. Knowing your own test values helps determine if any action is needed.
Interpreting Regional Data and Property Considerations
Median and Range Provide Context, Not Exact Home Conditions
Area sampling reflects multiple wells but does not define your individual home's water quality. Personal testing is essential to assess your specific situation.
Large or Multi-Unit Households
Higher water use increases total exposure, so testing and treatment capacity should reflect household size.
Seasonal or Second Homes
Water quality can vary over time or with well usage patterns, making periodic testing advisable.
Decision Summary
If you know uranium or radium may be present but lack test data, obtaining precise laboratory measurements is a crucial next step. The Fleck Uranium & Radium System ships ready to configure as a proven technology to reduce these metals when needed, supporting safer household water use in El Paso County.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2025-12-18. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Uranium in the 111ALVM aquifer (El Paso County): 114 results from 41 wells, median 1.8 ug/L, range 0.011-17.6 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.