How Sample Depth Influences Expected Copper Levels in Clark County's Aquifer N400BSNRGC
Laboratory reports for copper in water generally list concentration in micrograms per liter (ug/L). For Clark County, Nevada, groundwater sampled from aquifer N400BSNRGC shows copper levels measured between 1.0 and 7.6 ug/L across three wells ranging in depth from 291 to 1050 feet. This range and median (3.8 ug/L) are typical for deeper wells in this area and do not indicate spikes or problematic copper levels based on federal thresholds.
Public-System Records Versus Private-Well Testing: What Each Reveals
The copper data presented are from U.S. Geological Survey sampling of several wells in Clark County's aquifer, not from individual residential taps or private wells. Public-system records provide a regional baseline over a multi-year span, but your home's water quality can only be confirmed by testing your specific well or supply. Relying on regional figures helps understand general groundwater conditions but is not a substitute for site-specific analysis.
Seasonal and Multi-Year Variation: What the Clark County Sampling Dates Suggest
The copper concentrations reported derive from samples collected between September 2013 and March 2015. Over this roughly 18-month period, copper was consistently detected in all three samples without wide variation, indicating relatively stable groundwater copper levels in the aquifer. Seasonal effects appear minimal in this data set, but individual wells may show different patterns.
Understanding 'Detected', 'Median', and 'Range' in Copper Sampling Results
In this Clark County dataset, 'detected' means copper was measurable in all samples rather than below detection limits. The median represents the middle value (3.8 ug/L) among the three results, providing a central tendency of copper concentration. The range (1.0 to 7.6 ug/L) shows the variability across different wells. Importantly, none of these numbers exceed federal copper thresholds, which means these readings do not reflect violations or unsafe conditions but indicate presence at common background levels.
Ordering Troubleshooting Steps for Copper Stains in Your Household
If your existing water treatment equipment has failed and copper staining is visible, start with simple visual inspections of affected fixtures and appliances to confirm the stain appearance matches copper deposits. Next, perform a water test specific to your household source to measure copper concentration directly, as regional data cannot substitute for this. If copper is confirmed at concerning levels, consider a water treatment system designed to reduce copper stains, such as the Pentair Blue-Green Copper Stains Filter, which ships ready to configure for residential use.
In summary, while Clark County's aquifer sampling provides useful copper level benchmarks, identifying the source of copper stains at home requires specific well or tap testing. This page has guided you through understanding regional copper data and the logical steps to confirm and address copper stains in your household water.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2015-03-26. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Copper in the N400BSNRGC aquifer (Clark County): 3 results from 3 wells, median 3.8 ug/L, range 1.0-7.6 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.