Water drawn in Palm Beach County typically comes from the aquifer labeled 120UFAQ. This aquifer's water is pumped from depths between 1450 and 1673 feet, then delivered to homes through local plumbing systems. Understanding radon presence in this aquifer helps homeowners evaluate their water quality and treatment options.
If You Want to Compare Radon Levels in Palm Beach County to Neighboring Areas
The United States Geological Survey sampled radon-222 in three wells located within the Palm Beach County section of aquifer 120UFAQ in April 2015. These samples showed radon concentrations ranging from 212.0 to 310.0 picocuries per liter (pCi/L), with a median value of 290.0 pCi/L. This gives a snapshot of radon in this particular aquifer and area, but does not directly indicate levels in any neighboring counties or different aquifers, which can have their own distinct water chemistry. When comparing with nearby regions, use their separate sampling data rather than assuming similarity. Radon levels can vary due to geology and depth differences between aquifers.
If You Need To Understand What 'Detected', 'Median', and 'Range' Mean in This Radon Record
'Detected' means the sampling instruments found measurable radon in all three wells tested. The 'median' is the middle value of all measurements, showing a typical concentration found. The 'range' indicates the lowest and highest values among the samples, showing how much radon varied across these locations. None of these samples were above federal action thresholds, indicating that the radon levels detected were within regulatory bounds set for public water systems. However, these results only represent three wells and do not substitute for testing your own household water.
If You Want to Match Treatment Capacity to Your Household Water Demand
Radon mitigation devices must handle the volume of water your household typically uses each day. Knowing your daily water usage helps ensure that any selected treatment equipment can treat all the water you use without loss of flow or effectiveness. For an average residence, water usage often ranges from 50 to 100 gallons per person per day, but this varies with household size and lifestyle. The documented equipment solution for radon in water is the C-Series Radon in Water Filter. It ships ready to configure and is designed to reduce radon concentrations effectively when matched correctly to your household's flow rates.
If You Want to Gather Information Before Requesting Advice on Treatment Options
- Conduct a certified laboratory radon test on your household water to know its specific concentration.
- Note your average daily water consumption and peak flow requirements.
- Know the depth and type of your well if applicable, as radon levels can vary with well characteristics.
- Record any existing water treatment equipment in your home.
Having this information ready facilitates more accurate recommendations tailored to your household’s conditions.
If Your Household Is Large, a Second Home, or Used Seasonally
Larger households demand treatment equipment capable of higher flow rates, while second or seasonal homes may require consideration of startup effects after periods of inactivity. Radon levels generally originate from the aquifer and remain stable over short times, but usage patterns and plumbing can influence treatment needs. Adjusting treatment capacity accordingly helps maintain performance and cost efficiency.
If You Consider How Radon Levels Vary Seasonally or Over Multiple Years
The USGS samples from Palm Beach County's aquifer 120UFAQ were collected on April 22-23, 2015. These results show radon concentrations within a defined range without indication of long-term upward or downward trends. While data is limited, seasonal or multi-year variation in radon levels generally exists but tends to stay within characteristic ranges due to stable geology. For household decision-making, testing your own water periodically provides the most reliable current information.
These radon results come from three separate wells in Palm Beach County's aquifer 120UFAQ and do not establish conditions in your specific water source. For precise assessment, a certified laboratory test of your household water is essential. The USGS groundwater monitoring site for Palm Beach County documents these data and is the authoritative source for the area’s radon characterization.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2015-04-23. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the 120UFAQ aquifer (Palm Beach County): 3 results from 3 wells, median 290.0 pCi/L, range 212.0-310.0 pCi/L; none above any federal threshold